US

Orvaldi 650SP | UPS | 650VA/390W, 7Ah

CODE: 1065SP / EAN: 5904006036016

Orvaldi 650SP | UPS | 650VA/390W, 7Ah

CODE: 1065SP / EAN: 5904006036016
69,82 USD without VAT (net)
Out of stock
Battery voltage in UPS: 12V
UPS power (VA): 650
Audible alarm(s): Yes
Show more parameters
UPS power (VA):
650
750
900
Recommended products
Extralink CAT6 STP | Keystone | RJ45

Extralink CAT6 STP | Keystone | RJ45

Patch panele

2,94 USD without VAT
3,61  USD with VAT 23%

Add to cart
Extralink | Cable holder | FTTH

Extralink | Cable holder | FTTH

Montaż

0,13 USD without VAT
0,16  USD with VAT 23%

Add to cart

About product

ORVALDI 650SP

TheORVALDI 650SP UPS operates in line-interactive class. Thanks to the full microprocessor control it provides a high degree of protection for the connected equipment. With a wide input voltage range and AVR power stabilization, it extends battery life.

What are the characteristics of Orvaldi 650SP?

  • It has a microprocessor control
  • The battery can be replaced quickly and easily
  • It is equipped with overload and short circuit protection
  • It has a wide range of Boost stabilization

Specification

Features / filters
Battery voltage in UPS 12V
UPS power (VA) 650
Audible alarm modes Alarm when on battery, Fault, Low battery alarm, Overload alarm
Audible alarm(s) Yes
Auto-restart Yes
Battery capacity 7
Battery voltage 12
Cold start Yes
Depth 260
Form factor Compact
Height 80
Input frequency 50/60
Input operation voltage (max) 240
Input operation voltage (min) 220
Number of batteries supported 1
Output power 390
Output power capacity 0.65
Product colour Black
Surge protection Yes
UPS topology Line-Interactive
Waveform Pseudo sine
Weight 6
Width 170

Permissible voltage range 220/230/240VAC Nominal -25% 25%
Frequency 50Hz
Voltage shape PWM - approximated sine wave
Frequency 50Hz /-1Hz
UPS Power 650VA / 390W
Voltage stabilization. /-3%
Switch time. 2ms typical; 5ms maximum
Type Lead-Acid maintenance-free
DC Bus 12V/7Ah
Arts 1
Charging time Typically 8 hours to 90% charge
Sustain time. 6-20 minutes depending on load power
Too high/low voltage. Out of range AVR - switching to battery operation
Overload/short-circuit Fuse and current limitation for both mains and battery operation
Low battery Two-stage deep discharge protection
Interference filtering EMI/RFI filter
Type of sockets German or French
Quantity (pcs.) German/French (6): 3 with battery backup and 3 with surge protection
Dimensions (L*W*H)mm 260*170*80
Weight (kg) 6
LED signaling Green - mains operation, flashing yellow - battery operation
Buzzer Battery operation, low battery and overload
Cold Start Allows the UPS to run without line voltage

Faq

1. what is the Orvaldi 650SP used for?

Orvaldi 650SP is an uninterruptible power supply. It is ideal for servers, critical workstations and critical equipment (medical).

2) I need a portable uninterruptible power supply, will this power supply pass the test?

Yes, the UPS in this series weighs only 6 kg, making it one of the lighter UPS in our range.

3. does this power supply provide any degree of protection?

Yes, thanks to full microprocessor control it provides a high degree of protection for connected devices.

69,82 USD without VAT (net)
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
Please select a different country or region to shop in a language that suits you.