Ubiquiti Inc. new product UAP-FLEXHD has powerful features and is ideal for businesses and homes. Modern and minimalist design allows you to place the device close to users for optimal performance.
By using two wireless bands 5 GHz 4x4 MU-MIMO with a transfer rate of 1,733 Gbps and 2,4 GHz 2x2 MIMO with a bandwidth of 300 Mb/s we get a stable high-speed link that will allow you to connect many devices at once. Access points are ideal for creating wireless networks.
Control all your devices seamlessly with the UniFi software. The device has advanced features such as deep packet analysis, VPN, network management, hotspot, real-time data analysis.
UniFi AP Flex HD can be conveniently powered via the UniFi PoE switch.
The sleek, compact design allows the UniFi AP Flex HD to be placed indoors and outdoors.
| Basic technical parameters | |
| Dimensions | Ø 48,50 × 159,49 mm |
| Weight | 315 g |
| Network interface | (1) 10/100/1000 Ethernet port |
| Button | Reset |
| LED | System |
| Power supply method | 802.3af PoE |
| Power supply | 802.3af PoE 48 V, 0.32A Gigabit PoE Adapter |
| Maximum energy consumption | 10.5W |
| Range of supported voltages | 44 - 57VDC |
| Frequency | 2.4 GHz 5 GHz |
| Maximum power TX | 2.4 GHz 23 dBm 5 GHz 26 dBm |
| Throughput | 2.4 GHz 300 Mbps 5 GHz 1733 Mbps |
| Antenna gain | 2.4 GHz 1.6 dBi 5 GHz 4 dBi |
| Wi-Fi standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless network security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Mounting | Desk/wall/ceiling/pole |
| Operating temperature | -30 to 70° C |
| Operating humidity | 5 to 95% |
| Certificates | CE, FCC, IC |
If the Ethernet cable comes out of the wall:
1. Bend and remove the plastic covering the cable.
2. Use the wall mount to mark where to drill holes where you want to install the UAP FlexHD
3. Drill holes in the wall and take the Ethernet cable, putting it through the opening in the wall mount. Then use screws and wall plugs to fasten the wall mount.
4. Connect the Ethernet cable to the Ethernet port and put the UAP FlexHD on the wall mount.
Operating temperature: -30 to 70° C
Operating frequency: Dual Band (2.4GHz, 5GHz)
