Most commonly used for protection for your servers and critical loads such as medical devices. The double conversion design can guarantee reliable and stable protection for all sensitive devices. It does not use energy that has been stored in batteries - it gives pure stabilized sine wave output (230V /- 1%). The device adopts wider allowable input voltage under harsh conditions.
| Phases | Single-phase |
| Output power | 3000VA /2700W |
| Frequency range | 45Hz ~ 55Hz |
| Power Factor | ≧ 0.99 |
| Low Line Transfer | 160 VAC/140 VAC/120 VAC/110 VAC ± 5% |
| Low Line Comeback | 170 VAC /150 VAC/ 130 VAC /120 VAC± 5 % |
| High Line Transfer | 150 VAC ± 5 % or 300 VAC ± 5 % |
| High Line Comeback | 145 VAC ± 5% or 290 VAC ± 5% |
| Output voltage | 208/220/230/240 VAC |
| Synchronized Range | 48 ~ 52 Hz |
| Frequency (Batt. Mode) | 50 Hz ± 0.2 Hz |
| Peak factor | 3:1 |
| Voltage shape (Batt. Mode) | Pure stabilized sine wave |
| Switchover time | AC Mode to Batt. Mode: Zero, 4 ms (Typical) |
| Battery type | 12 V / 9 Ah |
| Charging current (max.) | 1.0 A |
| Typical recharge time | 4 hours to 90% capacity |
| Charging current (max.) | 8.0 A |
| Dimensions, L x W x H (mm) | 600 x 438 x 88 |
| Net weight (kg) | 29 |
| Noise level | Below 55dB |
| Operating Instructions | Download |
