Cisco SG110D-08 | Switch | 8x 1000Mb/s, Desktop

The SG110D-08 has 8 ports with a maximum throughput of 1000 Mb/s per port. The switch belongs to series 110 Cisco Small Business and is designed for use in small offices. The switch does not require configuration. Built-in QoS features automatically prioritize sensitive data such as video and audio.
The switch is designed to reduce energy consumption. It guarantees low energy consumption without loss of efficiency. No fans make it work quietly, discreetly. Each port of the switch independently sets the optimum speed and automatically selects the operation in half duplex or full duplex mode.
Increase the speed and efficiency of your office network at low cost and without wasting time on set-up. With Cisco switches you can easily build a highly reliable network to connect computers, printers, copiers and other office equipment. An efficient and reliable business-class office network that simply works right out of the box with the unmanaged Cisco® 110 switches.
The 110 series Switches Cisco enable basic network connectivity for small businesses, providing all the features and expandability. These switches provide the reliability you expect from Cisco. They work immediately, without installation software, without the need for configuration. Simply connect the switch and your computers or other business equipment and get down to work.
The Cisco 110 series is part of Cisco Small Business network solutions. It is a line of unmanageable switches providing Fast Ethernet and Gigabit Ethernet (SG series) connectivity. There are models available for desktop or rack-mounting. The devices are designed to meet basic network needs and optimize energy efficiency. They use less energy, providing the robust, failure-free connectivity required by businesses. The 110 series switches are a business-class network solution at an affordable price. They confirm the reliability that characterizes Cisco products.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 8x [10/100/1000M (RJ45)] |
Number of WAN ports | Not applicable |
10G support | No |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Built-in modem | None |
Certification | UL (UL 60950), CSA (CSA 22.2), CE, FCC 15 (CFR 47) A, FCC B |
Copper ethernet cabling technology | 1000BASE-T,100BASE-TX,10BASE-T |
DC input voltage | 12 |
Depth | 140 |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Forwarding rate | 11.9 |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 8 |
Harmonized System (HS) code | 85176990 |
Head-of-line (HOL) blocking | Yes |
Height | 30 |
Input current | 1 |
Input voltage | 12 |
Jumbo frames | 9216 |
Jumbo frames support | Yes |
LED indicators | Yes |
Management | No |
Networking standards | IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x |
Number of queues | 4 |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Power (W) | Without PoE |
Power over Ethernet (PoE) | No |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Quick start guide | Yes |
Rack mounting | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -20 - 70 |
Switch layer | L2 |
Switch type | Unmanaged |
Switching capacity | 16 |
Switching layer | 2 |
Type of case | Desktop |
Web-based management | No |
Weight | 430 |
Width | 160 |
Basic technical parameters | |
Cabling | Category 5e or higher |
Supported standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet |
LED lights | System/PWR, link/activity, 100M,*PoE, *mMax PoE, cable diagnostics, loop detection, *gigabit, *mini-GBIC (*if the switch is equipped with this port) |
Physical interfaces | |
Ports | 8 ports RJ-45 10BASE-T/100BASE-TX/1000BASE-T |
Power supply | DC 12 V, 1.0 A |
Socket | Kensington Castle Nest |
Physical dimensions (W x D x H) | 140 mm x 33.35 mm x 140 mm |
Weight | 0.43 kg |
Power over Ethernet (PoE) | None |
Fan | None |
Performance | |
Switching capacity | 16 Gb/s |
Capacity | 11.9 mpps (based on 64-byte packages) |
Functions | |
Head-of-line (HOL) | Prevention of HOL blocking |
Jumbo frame | 9216 bytes |
Quality of service (QoS) | 802.1p, 4 queues, priority and CSF |
Loop detection | Helps to detect loops in the network |
Cable diagnostics | Quick identification and troubleshooting of network cables and/or short circuits |
Installation and protection | |
Mounting options | Desktop |
Physical security lock | Kensington Castle Nest |
Environmental features | |
Certificates of conformity | UL (UL 60950), CSA (CSA 22.2), CE, FCC Part 15 (CFR 47) Class A, FCC Class B* (*selected models) |
Operating temperature | 0°C to 40°C (32°F to 104°F) |
Storage temperature | -20°C to 70°C (-4°F to 158°F) |
Ambient humidity | 10% to 90%, relative, non-condensing |
Humidity during storage | 5% to 90%, relative, non-condensing |
System memory | 128-MB RAM 128-MB Flash |
Package contents | 110 Series Cisco Switch 110 Power cable/mains adapter Operating instructions Mounting accessories |