MikroTik RB4011iGS+5HacQ2HnD-IN | WiFi Router | Dual Band 1733Mb/s, 10x RJ45 1000Mb/s, 1x SFP+
CODE: RB4011IGS+5HACQ2HND-IN / EAN: 4752224002693
ABOUT PRODUCT
Mikrotik Routerboard RB4011iGS+5HacQ2HnD-IN
The RB4011iGS+5HacQ2HnD-IN routerboard is a wireless router that uses the incredibly powerful quad-core Cortex A15 from Amazon's Annapurna laboratory, just like the other RB1100AHx4 class carrier device. The router works in 2x2 MIMO technology for 2.4 GHz and 4x4 MIMO for 5 GHz. CPU supports hardware IPsec acceleration. It has 1 GB of RAM, so it can easily handle any task that has been configured in RouterOS. All this power is contained in a compact, black solid metal housing with a matte finish.
High throughput
The presented routerboard is a two-band, four-chain device with supported data throughput up to 1733 Mbps operating in 5 GHz. It is compatible with older devices, it also has 2 GHz dual-chain interface. The wireless router is equipped with large external antennas with 360 degrees of coverage. Ten Ethernet ports guarantee 1 Gbps throughput, while the SFP+ port provides an optional 10 Gbps link through a SFP+ module (not included).
The most important features:
- 10 Gigabit Ethernet ports
- 1 GB of RAM
- 1 SFP+ slot
- RouterOS level 5
- Maximum theoretical Wi-Fi throughput: 300 Mb/s (2.4 GHz) and 1700 Mb/s (5 GHz)
- 2x2 MIMO for 2.4 GHz and 4x4 MIMO for 5 GHz
- Protocols 802.11 b/g/n and 802.11 a/n/ac
- Wireless router operating simultaneously in the 2.4 and 5 GHz bands
- Switch chip RTL8367SB
- AL21400 quad-core processor, 1.4 GHz clocked
SPECIFICATION
Basic technical parameters
| Product code | RB4011iGS + 5HacQ2HnD-IN |
| Architecture | ARM 32bit |
| CPU | AL21400 |
| Number of processor cores | 4 |
| CPU frequency | 1400 MHz |
| Dimensions | 228 x 120 x 30 mm |
| Operating system | RouterOS |
| Licence level | 5 |
| RAM | 1 GB MB |
| Ethernet ports | 10 Gigabit Ethernet ports 10/100/1000 Mbps |
| SFP+ slots | 1 |
| Serial Port | RJ45 |
| DC socket | Yes, 12 - 57 V DC |
| PoE input | Yes, port 1, 18 - 57 V DC (passive PoE) |
| PoE output | Yes, port 10, up to 57 V DC (passive PoE) |
| Maximum power consumption | 23 W (device only) 44 W using PoE |
| Built-in memory | 512 MB |
| Switch chip | RTL8367SB |
| Voltage monitoring | Yes |
| PCB temperature monitoring | Yes |
| Permissible operating temperature | From -40° to 45°C |
| Set composition | Device, 24 V power supply, 2.5 A, IEC cable |
| Wi-Fi frequency | Dual-band (2.4 GHz/5 GHz) |
| Radio standards | 802.11b/g/n 802.11ac |
| Polarisation | 2.4 GHz - 2x2 MIMO (dual chain), 5 GHz - 4x4 MIMO (quad chain) |
| Data carrier | NAND |
| Ethernet LAN interface type | Gigabit Ethernet |