Easy-to-read LEDs provide information about the status of: Ethernet connection, signal strength and power. U Fiber loco is a durable, high-performance GPON CPE device, which is characterized by exceptionally low power consumption, minimalist design and two powering options.
The UFiber loco can be powered by a Micro-USB power supply (supplied) or 24 V passive PoE.
You can connect up to 128 devices to one GPON port. Supporting GPON links of up to 20 km, UFiber loco integrates with UFiber OLT, UFiber OLT 4 and other OLT devices.
| Basic technical parameters | |
| Dimensions | 76,5 × 76,5 × 76,5 × 26,4 mm |
| Weight | 77 g |
| Network Interfaces | (1) SC/APC, GPON WAN (1) RJ45, Ethernet LAN |
| Speed network interface | (1) GPON WAN, ITU G.984, 2.488 Gbps download, 1.244 Gbps upload (1) GbE LAN, 10/100/1000 Mbps |
| Management interface | Ethernet in the band PON |
| Normal optical power range | TX (B+ class): 1.5-5 dBm. RX: -28 to -8 dBm |
| Power supply method | Micro-USB: 5 V, 1A 24 V PoE passive (pins +4, 5; -7, 8) |
| Power supply | Micro-USB Adapter: 5 V, 1A |
| Maximum electricity consumption | 3,5W |
| Range of supported voltages | 4.7 to 5.3 V |
| CPU specification | MIPS-32, 240 MHz |
| Memory | 128 MB DDR3 |
| Button | (1) Reset |
| Operating temperature | -10 to 45° C |
| Working humidity | 10 to 90% |
Connect the optical fiber from the passive optical network to the PON port.
1. Connect the Ethernet cable to the LAN port.
2. If you are using a micro-USB power supply, connect the other end of the Ethernet cable to the LAN network.
Operating temperature: -10 to 45° C
Power method: Micro-USB: 5 V, 1A, 24 V PoE passive (contacts +4, 5; -7, 8)
