Contact

Products

Account

Favorite

Cart

EOL

TP-Link T2500G-10TS | Switch | 8x RJ45 1000Mb/s, 2x SFP, Rack, Managed

Q: How to access the L2 manageable switch via the console port?

Step 1 Open Hyper Terminal . Choose Start -> All Programs -> Accessories -> Communications -> Hyper Terminal. Step 2 Create a new connection (e.g. TPLINK) and press OK. Step 3 Select the serial port that will be used to connect the console to the switch (e.g. COM1). Step 4 Specify the properties of the COM1 port and press OK. Step 5 Turn the switch on and press the Enter button. The Hyper Terminal window will appear. WARNING The Windows 7 and Vista systems do not have Hyper Terminal . Its module can be copied from the XP system: Copy the hypertrm.dll and hypertrm.exe files from the computer on which the XP system is installed and upload them to the computer with Win 7 or Vista. Run hypertrm.exe . Then you can perform the configuration described in this article.

CODE: TL-T2500G-10TS / EAN: 6935364098490

TP-Link T2500G-10TS | Switch | 8x RJ45 1000Mb/s, 2x SFP, Rack, Managed Ilość portów LAN8x [10/100/1000M (RJ45)]

TP-Link T2500G-10TS | Switch | 8x RJ45 1000Mb/s, 2x SFP, Rack, Managed Ilość portów LAN2x [1G (SFP)]

TP-Link T2500G-10TS | Switch | 8x RJ45 1000Mb/s, 2x SFP, Rack, Managed

(1)

CODE: TL-T2500G-10TS / EAN: 6935364098490

68,71 GBP without VAT (net)

Out of stock

LAN standard: Gigabit Ethernet 10/100/1000 Mb/s

Number of LAN ports: 8x [10/100/1000M (RJ45)] , 2x SFP (1,25G),

AC input frequency: 50

AC input voltage: 100 - 240

Show more parameters

About product

TP-Link Gigabit switch - a solution for small and medium enterprises

T2500G-10TS is a network switch made for small and medium companies. The switch has useful security and management functions. The device can function on the edges of the network, but also constitute its backbone. It has 2 SFP ports, which further increases the possibility of applying it to any network. The manageable T2500G-10TS switch is a great solution for workgroups and branches of companies looking for a cost-effective solution to ensure smooth gigabit transmission.

Advanced Layer 2 features

T2500G-10TS switch supports layer 2 switch functions, i.e. VLAN tagging (according to 802.1Q standard), QinQ, Port Mirroring, support for STP/RSTP/MSTP, LACP, as well as Data Flow functions (according to 802.3x standard). In addition, the switch supports advanced functions that protect network operation, such as feedback loop detection, cable diagnostics or IGMP Snooping. IGMP snooping provides the ability to switch multicast frames only for selected users, while IGMP throttling & filtering restricts access to resources for individual users at port level.

A secure network

Switch functions such as IP-MAC-Port binding, port protection, Storm Control and DHCP Snooping protect against ARP attacks, broadcast storms, etc. It is possible to define typical DoS attacks to be detected by the T2500G-10TS switch. This makes protection against them more effective than ever before. The use of access control lists (ACL, L2 to L4) prevents access to certain network resources; denial of packets can be set for specific source or destination MAC addresses, IP addresses, TCP/UDP ports and even VLAN identifiers. Additionally, the switch uses 802.1X encryption in combination with RADIUS server functions to authenticate those interested in accessing the network. The device allows users who do not use 802.1X protocol to connect to specific network resources as VLAN guests.

QoS function

The TL-T2500G-10TS uses advanced QoS service options to provide better audio, data and video transmission on the network. The administrator has the ability to determine the priorities of network traffic e.g. for individual IP addresses, MAC addresses, TCP or UDP ports etc. Thanks to this solution the audio and video transmission is smooth, clean and free from transmission delays. In combination with the support of voice transmission in virtual local networks, applications using this function work more smoothly and much more efficiently.

Easy to operate

The T2500G-10TS switch is easy to use and manage. The device is managed in various ways, e.g. through an intuitive graphical user interface in a web browser (GUI) or a command line interface (CLI). The transfer of packets can be protected by S SSL encryption or SSH. Support for NMMP (1/2/3) and RMON protocols allows the switch to transmit relevant status information and capture unexpected events.

Specification

Features / filters
LAN standard	Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports	8x [10/100/1000M (RJ45)] , 2x SFP (1,25G),
AC input frequency	50
AC input voltage	100 - 240
Access Control List (ACL)	Yes
Auto MDI/MDI-X	Yes
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Broadcast storm control	Yes
Built-in modem	None
Certification	CE, FCC, RoHS
Connectivity technology	Wired
Console port	RJ-45
Depth	200
Dimensions (WxDxH)	294 x 180 x 44
Fanless	Yes
Firmware upgradeable	Yes
Flow control support	Yes
Forwarding rate	14.9
GARP VLAN Registration Protocol (GVRP)	Yes
Height	44
Jumbo frames	10240
Jumbo frames support	Yes
LED indicators	Yes
MAC address filtering	Yes
MAC address table	8000
Management	Yes
Maximum data transfer rate	1
Minimum system requirements	Microsoft® Windows® 8, 7,Vista™, XP or MAC® OS, NetWare®, UNIX® or Linux.
Networking standards	IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Number of VLANs	4000
Numbers of pieces in the package	1-pack
Operating relative humidity (H-H)	10 - 90
Operating temperature (T-T)	0 - 40
Package depth	275
Package height	80
Package weight	2.57
Package width	400
Packet transfer speed	1.49 Mpps
Port mirroring	Yes
Power (W)	Without PoE
Power consumption (max)	10.7
Power requirements	100 - 240VAC, 50/60Hz
Product colour	Black
Quality of Service (QoS) support	Yes
Quick start guide	Yes
Rack mount kit	Yes
Rack mounting	Yes
SFP module slots quantity	2
SFP/SFP+ slots quantity	2
SSH/SSL support	Yes
Static port security	Yes
Storage relative humidity (H-H)	5 - 90
Storage temperature (T-T)	-40 - 70
Supported data transfer rates	10/100/1000 Mbps
Switch layer	L2
Switch type	Managed
Switching capacity	20
Switching layer	2
Type of case	Desktop
Virtual LAN features	MAC address-based VLAN,Port-based VLAN,Protocol-based VLAN
VLAN support	Yes
Width	294

Equipment features
Ports	8 RJ45 ports 10/100/1000Mbps Automatic negotiation of connection speeds and automatic crossover (Auto-MDI/MDIX) 2 SFP ports 1000Mbps 1 RJ45 console port 1 Micro-USB console port
Standards and protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p
Network cabling	10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100m) 100BASE-TX/1000Base-T: UTP cable cat 5, 5e, 6 or higher (up to 100m) 1000BASE-X: MMF, SMF
Fanless	Yes
Power supply	100～240VAC, 50/60Hz
Power consumption	Maximum: 8.38W (220V/50Hz)
Dimensions (S x G x W)	294 × 180 × 44 mm (11,6 × 7,1 × 1,7 inches)
Installation	For mounting in a rack
Max. energy consumption	8.38W (220V/50Hz)
Amount of heat generated	28.59 BTU/h
Performance
Switching capacity	20Gbp
Packet forwarding rate	14.9Mp/s
MAC address table	8k
Package buffer	4Mb
Jumbo frames	10KB
Software functions
Quality of Service function	Prioritization of CoS/DSCP traffic based on the IEEE 802.1p standard 4 queues Setting the queue of priorities: SP, WRR, SP+WRR Limitation of transmission depending on port, data flow Voice VLAN
Features of the layer 2 switch	IGMP Snooping: V1/V2/V3 MLD v1/v2 Snooping 802.3ad with LACP (up to 8 groups, 8 ports per group) STP/RSTP/MSTP Isolation of ports BPDU filtering/protection TC/Root protect Loop back detection Flow control LLDP/LLDP-MED DHCP VLAN Relay L2PT
VLANs	Simultaneous 4K VLAN support MAC/Protocol-based VLAN QinQ GARP/GVRP Management VLAN
Access control lists	Packet filtering based on source and destination MAC addresses L2～L4 IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID Limited in time
Transmission security	IP-MAC-Port-VID binding AAA DHCP Snooping IEEE 802.1X (Radius) based authentication: depending on port, MAC address Guest VLAN Radius Protection against DoS attacks Dynamic protection against ARP (DAI) attacks SSH: V1/V2 SSL v2/v3/TLSv1 Port security Broadcast/Multicast/Unknown-unicast Storm Control PPPoE
IPv6	Dual IPv4/IPv6 stack MLD Snooping IPv6 ND MTU detection ICMPv6 TCPv6/UDPv6
IPv6 applications	DHCPv6 customer Ping6 Tracert6 Telnet(v6) IPv6 SNMP IPv6 SSH IPv6 SSL Http/Https IPv6 TFTP
Management	GUI browser interface, CLI command line interface SNMP v1/v2c/v3, compatible with TP-LINK public and private MIB libraries Customer DHCP/BOOTP, DHCP Snooping, DHCP Option82 CPU monitoring Port Mirroring Dual Image SNTP time synchronization MRL/NTDP Firmware update: via TFTP protocol and web browser Diagnostics: VCT test System logos, MIB public libraries
Other
Certificates	CE, FCC, RoHS
Package contents	Switch Power Cable Quick Installation Guide CD Mounting elements Rubber coasters
System requirements	Microsoft® Windows® XP, Vista™, 7, 8, 10, MAC® OS, NetWare®, UNIX® or Linux.
Working environment	Operating temperature: 0℃~40℃ (32℉~104℉); Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing

Support

Downloads

Datasheet	Download
Firmware 2017-04-11	Download
Controller 2019-03-13	Download

Faq

How to access the L2 manageable switch via the console port?

Step 1 Open Hyper Terminal.

Choose Start -> All Programs -> Accessories -> Communications -> Hyper Terminal.

Step 2 Create a new connection (e.g. TPLINK) and press OK.

Step 3 Select the serial port that will be used to connect the console to the switch (e.g. COM1).

Step 4 Specify the properties of the COM1 port and press OK.

Step 5 Turn the switch on and press the Enter button. The Hyper Terminal window will appear.

WARNING
The Windows 7 and Vista systems do not have Hyper Terminal. Its module can be copied from the XP system: Copy the hypertrm.dll and hypertrm.exe files from the computer on which the XP system is installed and upload them to the computer with Win 7 or Vista. Run hypertrm.exe. Then you can perform the configuration described in this article.

68,71 GBP without VAT (net)

Any customs costs and VAT are to be borne by the buyer in the country of receipt.

Out of stock

Print version

Choose a different country or region to shop in the language that suits you

Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.

Favorite