This model is ideal for servers, critical workstations and highly critical devices (used in medicine). It has three times the power of its first predecessor.
TheOrvaldi VT3K on-line Tower is equipped with the double conversion of the Orvaldi VT on-line power supply series, which guarantees reliable and stable protection for your sensitive devices. It can accept a wider allowable input voltage for harsh environments without using the energy stored in the batteries. It offers us pure stabilized sine wave output (230V /- 1%). This is protection for your servers and critical loads such as medical devices that will never fail.
| Features / filters | |
| Battery voltage in UPS | 12V |
| UPS power (VA) | 3000 |
| AC outlet types | IEC 320 |
| AC outlets quantity | 4 |
| Audible alarm modes | Alarm when on battery, Battery replacement, Fault, Low battery alarm, Overload alarm |
| Audible alarm(s) | Yes |
| Auto-restart | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| Battery capacity | 9 |
| Battery voltage | 72 |
| Depth | 421 |
| Display type | LCD |
| Form factor | Mini Tower |
| Height | 318 |
| Input frequency | 40 - 70 |
| Input operation voltage (max) | 240 |
| Input operation voltage (min) | 220 |
| Noise level | 55 |
| Number of batteries supported | 6 |
| Output operation voltage (max) | 240 |
| Output operation voltage (min) | 200 |
| Output power | 2700 |
| Output power capacity | 3 |
| Power factor | 0.9 |
| Product colour | Black |
| UPS topology | Double-conversion (Online) |
| Waveform | Pure sine |
| Weight | 27.6 |
| Width | 190 |
| Model | ORVALDI VT3K on-line |
| Power | 1000VA/900W |
| Voltage | 220/230/240 VAC |
| Input voltage range. | 120-300VAC at 50% load, 180-280VAC at 100% load |
| Frequency | 40~70Hz (auto-adjustment) |
| Power factor | ≥0.99 at 100% load |
| Voltage | 200/208/220/230/240VAC (programowane) |
| Voltage stabilization (Batt. Mode) | ±1% |
| Frequency stabilization (Batt. Mode) | 60 Hz or 50 Hz ±0.5 Hz |
| Voltage shape (Batt. Mode) | Pure sine wave |
| Peak factor | 3:1 |
| Harmonic distortion | ≤ 3% THD (linear load), 6% max (battery mode before shutdown) |
| Switching time | 0 ms |
| Battery type | 6x 9Ah 12V |
| Typical recharge time | 4-6 hours to recharge to 90% capacity |
| Security | Overload, under-discharge and over-discharge protection |
| LCD | AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery |
| Emergency operation | Beep every 10 seconds |
| Low battery. | Beep every second |
| Overload | Beep every 0.5 sec. |
| Need to replace the battery. | Beep every 2 sec. |
| Injury | Continuous beep |
| Dimensions, L x W x H (mm) | 421 x 190 x 318 |
| Net weight (kg) | 27,6 |
| Noise level | less than 50dB at 1m distance |
| USB Port | Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC |
| Operating Instructions | Download |
This model is used for servers, critical workstations, and CRITICAL devices (used in medicine).
As for this model, it can take a wider allowable input voltage, not using the energy stored in the batteries, it puts out a CLEAN stabilized sine wave output. To answer your question - yes, it can handle it.
Yes. The Orvaldi VT on-line power supply series features a double conversion design. This guarantees reliable and stable protection for your sensitive devices.
