MikroTik S-3553LC20D is a pair of single-mode SFP WDM inserts, which enables transmission using a single optical fiber with a maximum speed of 1.25 Gb/s and a range of 20 km. The modules are equipped with LC connectors. One SFP WDM insert simultaneously sends and receives the signal using two different wavelengths, i.e. 1310 nm and 1550 nm. MicroTik S-3553LC20D is compatible with products such as RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S as well as with devices of other manufacturers.
| Basic technical parameters | |
| Type of module | SFP |
| Transmission speed | 1.25 Gbps |
| Distance | 20 km |
| Output connector | LC |
| Type of transmission | Single-Mode |
| Kind of asshole | Waveform (WDM) |
| Wavelength | 1310 nm/1550 nm |
| Type of cabling | Single mode optical fibre 8.3/125, 8.7/125, 9/125, 10/125 µm |
| Operating temperature | -40°C~70°C |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
The module is compatible with CCR1072-1G-8S+, CCR1036 series, CCR1016-12S-1S+, CCR1009 series, CRS317-1G-16S+RM, CRS210-8G-2S+IN, CRS212-1G-10S-1S+IN, CRS326/CSS326 series, among others.
