MikroTik CCR1009-7G-1C-PC | Router | 8x RJ45 1000Mb/s, 1x SFP, 1x USB

The device now has only fully independent Ethernet ports, each of which has a direct connection to the processor, which allows you to overcome the previous common 1Gbit limit from the switch ports and use the full processing power potential of the processor on these ports. The CCR1009-7G-1C-PC is equipped with a passive cooling chassis, two heat pipes and a special passive heat sink.
A single 1Gbit software interface which has two hardware interfaces - a SFP basket and a Gigabit Ethernet port, allowing you to use any available connection. It is also possible to switch between both physical interfaces in RouterOS. In case of disconnection, the combo-port provides the hardware function of emergency switching. The device supports 100BASE-LXE/100BASE-SX/100BASE-BX fiber modules as well as standard SFP 1.25G modules.
Features / filters | |
Number of LAN ports | 8x [10/100/1000M (RJ45)] , 1x SFP (1,25G), |
AC input voltage | 100 - 240 |
Additional connectors / interfaces | 1x USB, RS232, |
Built-in processor | Yes |
CPU frequency | 1 GHz |
DC-in jack | Yes |
Depth | 190 |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 8 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet WAN | Yes |
Height | 47 |
Installed SFP modules quantity | 1 |
Management | By web browser, CLI - Command Line Interface, |
Minimum RAM | 1024 |
Number of CPU cores | 9 |
Operating temperature (T-T) | -20 - 60 |
Power consumption (typical) | 25 |
Power over Ethernet (PoE) | Yes |
Power source type | AC, DC |
Processor frequency | 1000 |
Product colour | White |
RAM memory | 1GB |
RS-232 ports | 1 |
Type of case | Metal |
Type of device power supply | Passive PoE, Power supply, |
USB ports quantity | 1 |
USB version | 2.0 |
Width | 272 |
Basic technical parameters | |
Nominal processor frequency | TILE-Gx9, 9 cores, 1 GHz |
Ram | 1 GB |
Type of memory | NAND |
Size of memory | 128 MB |
10/100/1000 Ethernet ports | 7 |
Number of USB ports | 1 |
Socket | 1 |
PoE input | Yes |
Supported input voltage | 18 V - 56 V |
Voltage monitor | Yes |
PCB temperature monitor | Yes |
Processor temperature monitor | Yes |
Dimensions | 272×190×47mm |
Operating system | RouterOS level 6 license. |
Maximum power consumption | 5W |
Ethernet/SFP combo port | 1 |
USB socket | microUSB type AB |
Serial port | RS232 |
Weight | Set: 1,62 kg; Unit: 892 g |
User name is 'admin' and there is no password (press 'Enter'). To change password use '/password' command.
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
To update your software, you must download the latest package files (*.npk) from our website. Then connect to your router via FTP and upload the new packages to it using the binary transfer mode. Restart your router by issuing the command /system reboot.