APC 2Mi
The APC 2Mi is a small, but robust and high performance 2.4 GHz access point designed for indoor and outdoor applications (not exposed to direct rain water). This product is equipped with an extreme output power (up to 30 dBm) 802.11n MIMO radio which allows communicating effectively older 802.11b/g equip- ment together with latest standards wireless devices. The APC 2Mi is coupled with an advanced and feature-rich operating system which allows the product to operate as an access point and as a station at the same time, also act as bridge and as router.
The robust software engine running on the APC 2Mi provides a user-friendly Adobe Flex - based GUI with instant changes, includes useful installation tools (Site survey, Antenna alignment, Delayed reboot, spectrum analyzer, ping, traceroute) and also is compatible with Wireless Network Management System for one of the most advanced management tools on the market.
Wireless | |
WLAN standard | IEEE 802.11 b/g/n, iPoll proprietary |
Radio mode | MIMO 2x2 |
Operating modes | Access point (auto WDS), Station, Station WDS, iPoll Access Point, iPoll Station |
Radio frequency band | 2.4 GHz |
Transmit power | Up to 30 dBm (country dependent) |
Receive sensitivity | Varying between -94 and -74 dBm depending on modulation |
Channel size | 20, 40 MHz |
Modulation schemes | 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11 b: DSS (CCK, DQPSK, DBPSK) |
Data rates | 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps 802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11 b: 11, 5.5, 2, 1 Mbps |
Error correction | FEC, Selective ARQ |
Duplexing scheme | Time division duplex |
Antenna | |
Type | 2 x external omni-directional antenna |
Gain | 3 dBi |
Wired | |
Interface | 10/100 Base-T, RJ45 |
Networking | |
Operating modes | Bridge, Router |
WAN | Static IP, DHCP client, PPPoE client |
NAT | Routing w/ or w/o NAT |
Static routing | Supported |
DHCP | Client, Server, Relay |
Port forwarding | Supported |
VLAN | Supported for management and data |
Softwave | |
General | Ability to define/limit frequency, channel width, EIRP, modulation |
Advanced wireless functionality | ATPC (automatic transmit power control), auto - channel, auto - modulation |
Operating mode | Router, Bridge |
Wireless operating modes | AP auto WDS, Station,Station WDS, Virtual radios (VSSID), iPoll access point, iPoll client |
Wireless security | WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication) |
Wireless QoS | WMM |
WAN protocols | Static IP, DHCP client, PPPoE client |
Network | NAT, static routing, firewall, port forwarding, VLAN, traffic shaping |
Services | DHCP server, SNMP server, NTP client, Alerts, Remote syslog, Wireless and Ethernet statistics, bandwidth limiting |
Management | HTTP(S) GUI, SSH CLI, SNMP read, WNMS, troubleshooting file, reset via reset tool |
Physical | |
Dimensions | Length 123 mm (4.8 ‘’), width 85 mm (3.3 ‘’), height 20 mm (0.78 ‘’) |
Weight | 280 g (9.8 oz) |
Power supply | 12 - 48 V DC passive PoE |
Power source | 100 – 240 VAC via included adapter |
Power consumption | 7 W |
Environmental | |
Operating temperature | -20°C (-4 F) ~ +65°C (+149 F) |
Humidity | 0 ~ 90 % (non-condensing) |
Management | |
System configuration | User-friendly web GUI, Command line via SSH, centralized Wireless Network Management System, reset via reset tool |
System monitoring | SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap |
Regulatory | |
Certification | FCC/CE/Safety/RoHS compliance |
