Cambium EPMP Force 300-25 EU | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi

The ePMP Force 300-25 system operates in 802.11 ac Wave2 standard, provides maximum throughput up to 500 Mbps. The device definitely stands out from the competition due to the power of radio transmitter and narrow transmission beam. It is an obvious advantage in an environment with a significant density (noise) of signals from other WiFi networks. Devices with wide antenna propagation are always easy to see (align the antenna), but their wide, non-selective antennas pick up not only their dedicated signal but also all foreign signals, thus increasing the noise level and lowering the achievable connection speed. Only the use of antennas with narrow beamforming width allows, on the one hand, to precisely send a focused signal in the desired direction, and on the other hand, minimizes the presence of extraneous signals at the transceiver head, resulting in higher connection speed. Providing reliable connectivity, due to the overcrowded R-band, is a challenge for wireless service providers around the world. With free channels becoming an increasingly scarce commodity, finding the right equipment to put together a broadband link in such a noisy space has become essential. The ePMP Force Series is the answer to this challenge, excelling in both low and high density environments.
Features / filters | |
Operating frequency | 5 GHz |
Number of LAN ports | 1x [10/100/1000M (RJ45)] |
Maximum wireless transmission speed | 500 Mbps |
Wireless network standards | IEEE 802.11ac Wave 2 |
Region / power cable | ROW/EU |
Type of power supply for the device | PoE 802.3af/at |
Operating temperature | -30°C to +60°C |
MIMO type | 2x2 |
Type of device | Radiolink, Client device |
Antenna gain | 21dBi - 30dBi |
Technical specifications | |
Channel spacing | In 5 MHz steps |
Frequency range | Broadband support 4910 - 5970 MHz (note: allowable frequencies and bands are dictated by country-specific regulations). |
Channel width | 20 | 40 | 80 MHz |
ARQ | Yes |
Nominal receive sensitivity (w/ FEC) at 20 MHz channel | MCS0 = -87 dBm to MCS8 (256QAM-3/ 4) = -63 dBm |
Nominal receive sensitivity (w/ FEC) on channel 40 MHz | MCS0 = -85 dBm to MCS9 (256QAM-5/ 6) = -59 dBm |
Nominal receive sensitivity (w/FEC) on channel 80 MHz | MCS0 = -82 dBm to MCS9 (256QAM-5/ 6) = -56 dBm |
Modulation levels (adaptive) | MCS0 (BPSK) to MCS9 (256QAM-5/6) |
Transmission power range | 0 to +27 dBm (total, up to regional EIRP limit) (1 dB step) |
Physical characteristics | |
Overvoltage immunity | 1 Joule Integrated (C000000L065A - 30V surge fuse recommended) |
Watertightness class | IP55 |
Operating temperatures | -30° C to + 60° C (-22° F to + 140° F) |
Weight | 2.4 kg (5.3 lbs) |
Wind resistance | 180 km/hr (112 mi/hr) |
Dimensions (diameter x depth) | 47 cm x 31 cm (18.5 in x 12.2 in) |
Range of pole diameters | 6.4 cm - 7.6 cm (2.5 inches - 3 inches) |
Energy consumption | 12 watts |
Input voltage | 30 volts |
Security | |
Encryption | 128-bit AES (CCMP mode) |
Certificates | |
FCC Identifier | Z8H89FT0017 |
Industrial certificate | 109W-0017 |
CE | EN 301 893 V2.1.1 (5,4 GHz), EN 302 502 V2.1.1 (5,8 GHz) |
Part Number of device | |
C050910C203A | ePMP Force 300-25 5 GHz High Gain Radio (EU) (power supply with EU plug) |
C050910C001A | ePMP Force 300-25 5 GHz High Gain Radio (RoW) (without cable) |
C050910C201A | ePMP Force 300-25 5 GHz High Gain Radio (RoW) (power supply with EU plug) |
Antenna specifications | |
Frequency range | 4910 - 5970 MHz |
Antenna type | Bowl |
Peak Yield | 25 dBi |
3dB horizontal beam width | 6-10 degrees |
3dB vertical beamwidth | 6-10 degrees |
Back radiation | 25 dB |
Cross polarization | 20 dB |