Wireless service providers and businesses around the world are challenged to provide a stable communication platform in an overcrowded RF environment. Free bandwidth becomes scarce, finding the right broadband solution is essential for all low and high density deployments. Cambium Networks overcomes this challenge with a technological breakthrough that provides excellent performance, noise immunity and long range of possible connections - even in the most congested environments. The Force 300-13 client device is a combination of the latest 802.1lac Wave 2 technology and field-proven ePMP device performance, enabling transfers of up to 600 Mbps. The ePMP Force 300-13 is a powerful but inexpensive end user module built to work with the ePMP3000 access point, which, thanks to its downward compatibility, enables work with the ePMP 2000 AP and is a platform for future migration to 802.1lac Wave 2 technology. The Force 300-13 module has an integrated 13 dBi panel antenna with narrow beam width.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Maximum wireless transmission speed | 600 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
Wireless network standards | IEEE 802.11ac Wave 2 |
Antenna gain | 11dBi - 20dBi |
Device type | Client device |
Horizontal beamwidth | 30° |
MIMO Type | 2x2 |
Type of device power supply | Passive PoE |
Working temperature | -30°C to +60°C |
The spectrum |
Channel spacing | Configurable in 5 MHz steps |
Antenna specifications | |
Channel width | 20/40/80 |
Frequency range | 4,9 - 5,970 MHz (Note: Allowed frequencies and bands depend on national regulations). |
Type of antenna | Panel |
Max gain | 13 dBi |
Horizontal beam width | 30 degrees |
Vertical width of the beam | 28 degrees |
Hardware data | |
MAC layer (Media Access Control) | Ownership of Cambium |
Own physical layer | 802.11ac Wave 2 (2x2 MIMO / OFDM) |
Ethernet interface | 10/100/1000 BaseT, compatible with PoE Cambium and standard PoE discharges |
Protocols used | IPv4 / IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH |
Network management | IPv4 / IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro ™ |
VLAN | 802.1Q with priority 802.1p |
VLAN | 802.1Q with priority 802.1p |
ARQ | Yes |
Nominal reception sensitivity (w / FEC) at 20 MHz channel | MCS0 = -89 dBm to MCS8 (256 QAM-3/4) = -68 dBm |
Nominal reception sensitivity (w / FEC) at 40 MHz channel | MCS0 = -87 dBm for MCS9 (256 QAM-5/6) = -66 dBm |
Nominal reception sensitivity (w / FEC) at 80 MHz channel | MCS0 = -84 dBm for MCS9 (256 QAM-5/6) = -61 dBm |
Modulation levels (adaptive) | MCS0 (BPSK) to MCS9 (256 QAM-5/6) |
Transmission power range | 0 to +28 dBm (in combination with the regioan EIRP limit) (1 dB interval) |
Physical Features Equipment | |
Surge suppression | up to 1 joule (C00000000L065A - for optimal protection, a 30-volt Gigabit surge protector is recommended) |
Protection rating | IP55 |
Temperature | From -30 ° C to + 60 ° C (from -22 ° F to + 140 ° F) |
Weight | 0.48 kg (1.05 lbs) (includes integrated mounting bracket) |
Resistance to wind gusts | to 180 km / h (112 miles / h) |
Dimensions (diameter x depth) | 13.0 x 20.3 x 5.40 cm (5.1 x 8.0 x 2.1 inches) |
Acceptable range of mounting pole diameters | 1 - 1.6 inches (2.5 - 4.1 cm) with clamp attached; up to 2.7 inches (5.7 cm) with larger clamp |
Energy consumption | 12 watts |
Input voltage | POE passive (nominal 30 VDC); range 14-30 VDC |
Security | |
Encryption | 128-bit AES (CCMP mode) |
Certificates | |
FCC Identifier | Z8H89FT0048 |
Industry Canada Cert | 109 W-0048 |
CE | EN 301 893 V2.1.1 (5,4 GHz), EN 302 502 V2.1.1 (5,8 GHz) |
Part Numbers of Equipment | |
C058900C701A | ePMP 5GHz Force 300-13 SM (FCC) (cable with American plug) |
C050900C701A | ePMP 5GHz Force 300-13 SM (IC) (cable with Canadian / US plug) |
C050900C702A | ePMP 5GHz Force 300-13 SM (EU) (cable with EU plug) |
C050900C703A | ePMP 5GHz Force 300-13 SM (EU) (cable with British plug) |
C050900C704A | ePMP 5GHz Force 300-13 SM (ROW) (without cable) |
C050900C705A | ePMP 5GHz Force 300-13 SM (ROW) (cable with American plug) |
C050900C706A | ePMP 5GHz Force 300-13 SM (ROW) (cable with EU plug) |
C050900C707A | ePMP 5GHz Force 300-13 SM (ROW) (cable with British plug) |
C050900C708A | ePMP 5GHz Force 300-13 SM (ROW) (cable with Indian plug) |
C050900C709A | ePMP 5GHz Force 300-13 SM (India) (cable with Indian plug) |
C050900C710A | ePMP 5GHz Force 300-13 SM (ROW) (cable with Chinese plug) |
C050900C711A | ePMP 5GHz Force 300-13 SM (ROW) (cable with Brazilian plug) |
C050900C712A | ePMP 5GHz Force 300-13 SM (ROW) (cable with Argentinian plug) |
C050900C713A | ePMP 5GHz Force 300-13 SM (ROW) (cable with ANZ plug) |
C050900C714A | ePMP 5GHz Force 300-13 SM (ROW) (cable with South Africa plug) |
C050900C715A | ePMP 5GHz Force 300-13 SM (ROW) (without power supply) |
Catalogue Card (ENG) | Download |