OLT has four PON ports to connect up to 512 ONU units and SFP+ port provide connectivity up to 10 Gbps.
Metal housing with a height of 1U allows convenient installation in standard 19-inch racks.
Easy configuration of OLT and management of multiple points with comprehensive UNMS software.
| Basic technical parameters | |
| Dimensions | 299,80 × 258,95 × 42,55 mm |
| Weight | 1.93 kg |
| Maximum energy consumption | 35W (excluding SFP transmitters) |
| Power supply method | 110 - 240VAC modular port |
| Power supply | AC/DC Internal 56W DC |
| Voltage range supported | 100 - 240VAC; 16-25VDC |
| Button | Reset |
| Processor | MIPS 1004Kc 880 MHz Dual-Core |
| System memory | 512 MB DDR3 512 MB NAND |
| LEDs | System PON data ports SFP+ RJ45 (MGMT) |
| Data Interfaces | (4) OLT GPON (1) 1G/10G SFP+ |
| Management interface | (1) RJ45 Ethernet port |
| Serial console port | (1) RJ45 |
| Installation in a rack | Yes |
| Operating temperature | -10 to 45° C |
| Operating humidity | 10 - 90% |
| Certificates | CE, FCC, IC |
| GPON SFP OLT transceiver OLT | Single fiber, SM SC/UPC, 20 km, 1490 nm TX/1310 nm RX, ITU-T G984.2 Class B+ |
1. Attach the Mounting Brackets to the UFiber OLT-4 using the eight Bracket Screws.
2. Attach the UFiber OLT-4 to the rack using the four Mounting Screws.
3. Connect the Power Cord to the Power Port on the back.
4. Connect the other end of the Power Cord to a power outlet.
Operating temperature: -10 to 45° C
Power method: 110 - 240VAC modular port
