Ubiquiti PBE-5AC-400-ISO | CPE | PowerBeam, 5GHz, 1x RJ45 1000Mb/s, 25dBi
![](https://www.batna24.com/img2/1000/127430_1.webp?20989284238)
![](https://b2b.batna24.com/products/Logos/product/DNXFGKQUEKSJ.png)
EN
airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased performance.
The integrated separator design improves RF isolation to filter out spatial interference, and the metal interior of the rear housing amplifies the radio frequency shielding.
The integrated isolator design spatially filters out interference, so that PowerBeam ac ISO provides better signal quality. Both graphs near the field are displayed in watts and use a linear scale.
Ubiquiti's airMAX® software with a custom chipset significantly improves TDMA delay and network scalability. The custom processor provides hardware acceleration capabilities for the airMAX schedule to support high data rate and dense modulation used in airMAX ac technology.
Ubiquiti's airMAX® technology has been proven in millions of devices worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed multipoint networks.
airOS® v7 has increased usability and its basic functions are:
airView enables identification of noise signatures and planning the network in such a way to minimize interference. airView performs the following functions:
airMAX ac supports high data transmission speeds, which are as high as 450+ Mbps and require dense modulation: 256QAM has a significant increase over 64QAM, which is used in airMAX.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
AC input voltage | 24 |
Antenna gain | 21dBi - 30dBi |
Antenna gain level (max) | 25 |
Certification | FCC, IC, CE, RoHS |
Connectivity technology | Wired |
CPU frequency | 560 MHz |
Device type | Client device |
Dimensions (WxDxH) | 459 x 261 x 459 |
Frequency band | 5.15 - 5.875 |
Internal memory | 64 |
LED indicators | LAN, Power, WLAN |
Maximum data transfer rate | 1000 |
Modulation | BPSK,QAM,QPSK |
Networking standards | IEEE 802.11ac |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 70 |
Power LED | Yes |
Power over Ethernet (PoE) | Yes |
Power supply | 8.5 |
Product colour | White |
RAM memory | 64MB |
Type of device power supply | Passive PoE |
Weight | 3.22 |
Basic technical parameters | |
Dimensions | 459 × 459 × 261 mm |
Weight | 3.22 kg |
Power supply | 24 V, 0.5A Gigabit PoE |
Power supply | Passive PoE (Pairs 4, 5+; 7, 8 Back) |
Voltage range | 20-26VDC |
Maximum power consumption | 8.5W |
Frequency of operation | 5150 - 5875 MHz |
Gain | 25 dBi |
Network interface | (1) 10/100/1000 Ethernet port |
CPU specification | Atheros MIPS 74Kc, 560 MHz |
Memory RAM | 64 MB DDR2, 16 MB Flash |
LED indicators | (1) Power (1) LAN (4) WLAN |
LED signal strength | Adjustable at software level to match RSSI levels |
Supported bandwidths | PtP mode 10/20/30/40/50/60/80 MHz PtMP mode 10/20/30/40 MHz |
Maximum VSWR | 1.5:1 |
Built-in downward tilt mechanism | ± 20° |
Polarisation | Dual-linear |
Case | External UV-resistant plastic casing |
Installation | Pole (parts included) |
Wind resistance | 559 N @ 200 km/h |
Maximum wind resistance | 200 km/h |
ESD/EMP protection | _± 24 kV, Contact ± 24 kV |
Operating temperature | -40 to 70° C |
Operating humidity | 5 to 95% |
Certificates | FCC, IC, CE |
RoHS compliance | Yes |
Corrosion resistance test | 68-2-11 (ASTHMA B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature test | IEC 68-2-14 |
UV test | IEC 68-2-5 in 40° C (104° F) The equivalent: ETS 300 019-1-4 |
Rain test | ETS 300 019-1-4 Equivalent: MIL-STD-810 G Method 506.5 |
1. Connect the Ethernet cable from the device’s Ethernet port to the POE port of the Gigabit PoE adapter.
2. Connect an Ethernet cable from your LAN to the adapter’s LAN port
3. Connect the Power Cord to the adapter’s power port. Connect the other end of the Power Cord to a power outlet.
Operating frequency 5 GHz
Device power type: Passive PoE