EN
PowerBeam® AC integrates a separate Wi-Fi signal for quick and easy configuration with a mobile device.
Equipped with increased protection against electrostatic discharges, the PowerBeam® AC offers a more robust mounting with a comfortable lever or handle.
Ubiquiti's InnerFeed® technology integrates the radio with the antenna, so there is no need for cables to connect the radio to the antenna. This improves performance by eliminating cable failures.
PowerBeam® AC does not require tools, only one wrench is needed to mount it on the pole.
airMAX® ac products offer reduced latency, noise immunity, scalability and significantly increased performance.
Ubiquiti's airMAX® software with a custom chipset significantly improves TDMA delay and network scalability. The custom processor provides hardware acceleration capabilities for the airMAX schedule to support high data rate and dense modulation used in airMAX ac technology.
PowerBeam® AC is characterized by the highest reinforcement due to its size. The excellent directionality of the PowerBeam AC signal provides the best performance in high interference environments.
airOS®8 offers advanced features including support for the airMAX® ac protocol, real time signal analysis and a completely new design for increased usability.
Features / filters | |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
Antenna gain | 21dBi - 30dBi |
Antenna gain (2.4 GHz) | 18 |
Antenna gain level (max) | 18 |
Antenna type | Directional antenna |
Built-in processor | Yes |
Cables included | AC |
Cabling technology | 10/100/1000Base-T(X) |
Certification | CE, FCC, IC, ETSI300-019-1.4 |
Depth | 289 |
Device type | Client device |
Diameter | 42 |
Frequency band | 2.4 |
Harmonized System (HS) code | 85177100 |
Housing material | Plastic |
Input voltage | 22 - 26 |
Internal memory | 64 |
Maximum operating distance | 20000 |
Modulation | 16-QAM,256-QAM,BPSK,QPSK |
Mounting | Pole |
Mounting kit | Yes |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 70 |
Power consumption (max) | 7.5 |
Power source type | PoE |
Processor model | Atheros MIPS 74Kc |
Product colour | White |
Purpose | Outdoor |
Quantity per pack | 1 |
Quick installation guide | Yes |
Survival wind speed | 200 |
Sustainability certificates | RoHS |
Type of device power supply | Passive PoE |
Ultraviolet (UV) resistant | Yes |
Weight | 1.79 |
Wind load | 342.5 |
Basic technical parameters | |
Dimensions | 420 × 420 × 420 × 289 mm |
Weight | 1,795 kg |
Power supply | 24 V, 0.5A Gigabit PoE Adapter (included) |
Maximum power consumption | 7,5 W |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 Back) |
Voltage range supported | from 22 to 26VDC |
Gain | 18 dBi |
Network interface | (1) 10/100/1000 Ethernet port |
CPU specification | MIPS 74Kc |
Memory | 64 MB |
LEDs | Power supply Ethernet (4) Signal strength |
Channel size | 10/20/40 MHz PtP mode 10/20/40 MHz PtMP mode |
Characteristics of the housing | Antenna input, plate reflector, UV-stabilized plastic, SPCC powder-coated |
Mounting | On a pole (kit included) |
Wind load | 342.5 N at 200 km/h |
Maximum wind resistance | 200 km/h |
ESD/EMP protection | ± 24 kV, Contact ± 24 kV |
Operating temperature - | 40 to 70° C |
Working humidity | 5 to 95% |
RoHS compliance | Yes |
Corrosion resistance test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature shock test | IEC 68-2-14 |
UV test | IEC 68-2-5 in 40° C (104° F) Equivalent: ETS 300 019-1-4 |
Environmental tests | ETS 300 019-1-4 Equivalent: MIL-STD-810 G Method 506.5 |
Certificates | CE, FCC, IC |
Operating frequency (MHz) | 2412-2472 |
Management Radio (MHz) | 5150-5250 |
Metoda jest dostępna przez 15 minut natychmiast po włączeniu zasilania urządzenia. W razie potrzeby możesz włączyć ponownie zasilanie PowerBeam.
1. Pobierz aplikację UNMS z App Store (iOS) lub Google Play™ (Android).
2. Podłącz sieć Wi-Fi do urządzenia PowerBeam nazwanego:PBE-2AC-400:
3. Uruchom aplikację.
4. Dotknij opcji PowerBeam na ekranie połączenia.
5. Dotknij opcji Połącz na ekranie login
6. Wybierz swój kraj i dotknij Gotowe.
7. W sekcji konfiguracja dostosuj ustawienia do własnych potrzeb.