EN
Thanks to its innovative industrial design with patented airMAX ac technology, the NanoBeam AC is ideal for CPE applications requiring maximum performance with the smallest possible area. The device integrates a separate Wi-Fi radio for quick and easy configuration using a mobile device.
NanoBeam AC has increased protection against electrostatic events.
Ubiquiti's airMAX mechanism with its own chipset significantly improves TDMA delay and network scalability. A custom processor provides hardware acceleration for the airMAX planner to support high data rates and dense modulation used in airMAX ac technology.
NanoBeam AC has high gain thanks to its size. The excellent directivity of the NanoBeam AC beam provides the best performance in high noise environments.
Ubiquiti's airMAX technology has been proven in millions of applications worldwide, demonstrating exceptional performance in open environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
NanoBeam AC can be mounted on a variety of surfaces including poles or walls and offers the freedom of three-axis positioning. No screws are required for pole mounting and only one wall screw is required for wall mounting.
airOS 8 offers advanced features including airMAX ac protocol support, real-time RF analysis and a completely new design for increased usability.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 2.4 GHz |
2.4 GHz | Yes |
5 GHz | No |
Antenna gain | 11dBi - 20dBi |
Antenna gain level (max) | 13 |
Built-in processor | Yes |
Certification | RoHS, CE, FCC, IC |
CPU frequency | 533 MHz |
Depth | 125 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Frequency band | 2.412 - 2.472 |
Harmonized System (HS) code | 85176990 |
Height | 189 |
Housing material | Plastic |
Internal | No |
Internal memory | 64 |
LED indicators | LAN, Power, Signal strength |
Mounting kit | Yes |
Operating relative humidity (H-H) | 5 - 95 |
Operating system installed | AirOS |
Operating temperature (T-T) | -40 - 70 |
Output current | 0.5 |
Output voltage | 24 |
Placement | Pole |
PoE adapter included | Yes |
Power consumption (max) | 7.5 |
Power over Ethernet (PoE) | Yes |
Product colour | White |
RAM memory | 64MB |
Type of device power supply | PoE 802.3af |
WAN connection | Wi-Fi |
Weight | 530 |
Width | 189 |
Working temperature | -40°C to +70°C |
Basic technical parameters | |
Dimensions (with mounting) | 189 × 189 × 125 mm |
Weight | 0.530 kg |
Power supply | 24 V, 0.5A Gigabit PoE Adapter (included) |
Maximum power consumption | 7,5 W |
Strengthening | 13 dBi |
Network interface | (1) 10/100/1000 Ethernet port Wi-Fi for management |
CPU specification | Atheros MIPS 74Kc, 533 MHz |
Memory | 64 MB DDR2 |
LEDs | Power supply, Ethernet, (4) Signal strength |
LED signal | Programmable, customizable to your own RSSI levels. |
Maximum VSWR | 1.5:1 |
Channel size | 10/20/40 MHz PtP mode 10/20/40MHz PtMP mode |
Polarisation | Dual line |
Case | UV-stabilised plastic |
Mounting | Pole-Mount (Kit Included), Wall-Mount |
Wind loading | 45.4 N at 200 km/h |
Wind survivability | 200 km/h |
ESD/EMP protection | air ± 24 kV, contact ± 24 kV, |
RoHS compliance | Yes |
Rust resistance test | IEC 68-2-11 (ASTM B117), equivalent to: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature shock test | IEC 68-2-14 |
UV test | IEC 68-2-5 at 40° C (104°F), equivalent: ETS 300 019-1-4 |
Rain test | ETS 300 019-1-4, equivalent to: MIL-STD-810 G Method 506.5 |
Operating temperature | -40 to 70° C |
Operating humidity | 5 to 95% |
Certificates | CE, FCC, IC |
Operating frequency (MHz) | Worldwide 2412 - 2472 |
Management frequency (MHz) | 5150 - 5250 |
Verify connectivity in the airOS Configuration Interface. There are two methods, the UNMS™ App and Web Portal. Both are available for 15 minutes immediately after you power on the NanoBeam. If necessary, you can power cycle the NanoBeam to re-enable its Wi-Fi.
UNMS App
1. Download the UNMS app from the App Store (iOS) or
Google Play™ (Android).
2. Connect your device’s Wi-Fi to the NanoBeam SSID named: NBE-2AC-13:MAC_Address
Attention: Ensure that DHCP is enabled on your Wi‑Fi adapter.
3. Launch the app.
4. Tap the NanoBeam on the Connections screen
5. Tap Connect on the Login screen.
6. Select your Country and tap Done.
7. Customize your settings as needed.
Operating temperature: -40 to 70° C
Maximum power consumption 7.5 W