Ubiquiti ES-10XP | Switch | EdgeMAX EdgeSwitch, 8x RJ45 1000Mb/s PoE, 2x SFP
![](https://www.batna24.com/img2/1000/326777_1.webp?20989284238)
![](https://b2b.batna24.com/products/Logos/product/DNXFGKQUEKSJ.png)
EN
Eight Gigabit RJ45 ports offer 24 V PoE output, while the two SFP ports offer fiber optic connectivity.
The EdgeSwitch 10XP uses 50% less energy than the previous generation of EdgeSwitch XP, allowing for passive cooling.
EdgeSwitch 10XP supports an extensive suite of advanced Layer 2 switching functions and protocols.
EdgeSwitch 10XP can be mounted on a wall or in a rack.
The new user interface is easy to learn and allows you to monitor and configure individual functions with an intuitive, graphical user interface.
EdgeSwitch 10XP is supported and managed by UNMS™ - a versatile controller with an intuitive user interface. A single control plane manages registered EdgeMAX® devices in multiple locations.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 2x SFP (1,25G), 8x [10/100/1000M (RJ45)] , |
Number of PoE ports | 8x [Passive PoE 24V (1G)] |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Certification | CE, FCC, IC |
Console port | RJ-45 |
DC input voltage | 24 |
DC voltage range | 9 - 30 |
Depth | 90 |
DHCP features | DHCP snooping |
Forwarding rate | 14.88 |
Harmonized System (HS) code | 85176990 |
Height | 31.1 |
Input current | 2.5 |
Jumbo frames support | Yes |
LED indicators | Activity, Link, Speed, Status |
Management | CLI - Command Line Interface, By web browser, |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -10 - 50 |
Output current | 5 |
Power consumption (max) | 8 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 8 |
Power over Ethernet (PoE) power per port | 15 |
Power over Ethernet (PoE) voltage range | 24 - 24 |
Product colour | Black |
Rack mounting | Yes |
SFP module slots quantity | 2 |
Spanning tree protocol | Yes |
Switch layer | L2 |
Switch type | Managed |
Switching capacity | 20 |
Switching layer | 2 |
Type of case | Desktop |
VLAN support | Yes |
Web-based management | Yes |
Weight | 500 |
Width | 207 |
Basic technical parameters | |
Dimensions | 207 × 31,1 × 90 mm (8,15 × 1,22 × 3,54") |
Weight | 500 g (1.10 pounds) |
Total transmission speed without line blocking | 10 Gbps |
Switching capacity | 20 Gbps |
Speed of transmission | 14.88 Mpps |
Maximum energy consumption (excluding PoE output) | 8W |
Power supply method | 24VDC, 2.5A. |
Voltage range supported | 9 - 30VDC, 5A |
Power supply | 24VDC, 2.5A power supply (included) |
Network Interfaces | (8) 10/100/1000 Mb/s RJ45 (2) 1 Gbps SFP |
Management interface | Ethernet In-Band |
ESD/EMP protection | Air: ± 24 kV, contact: ± 24 kV |
Operating temperature | -10 to 50°C |
Operating humidity | 5 to 95% |
Shocks and vibrations | Standard ETSI300-019-1.4 |
PoE | |
PoE interface | (8) 24VDC passive PoE (pins 4, 5+; 7, 8-) |
Maximum passive PoE power per port | 15W |
24 V Passive PoE supply voltage range | 24 V |
1. Remove the protective cap covering the SFP.
2. Connect a compatible fiber optic module to the SFP.
3. Connect the fiber cable to the fiber module. Then connect the other end of the cable to another fiber optic device.
.