EdgePoint™ offers an innovative combination of high routing performance, fiber optic backhaul capabilities and the convenience of passive PoE operation.
EdgePoint is equipped with FiberProtect technology, which significantly reduces failures related to electrostatic discharges (ESD) and electromagnetic interference (EMI). It significantly improves data signal integrity and strengthens wired data back-up connections to a single fiber optic cable for long-distance connectivity.
EdgePoint is the first application-specific designed WISP control point. EdgePoint combines advanced EdgeMAX® routing capabilities with fiber optic backhaul and universal powering capabilities.
A single, compact system eliminates clutter, expensive cabinets, external installations and excessive maintenance.
| Basic technical parameters | |
| Dimensions without wall mounting | 326,6 × 382,7 × 88,8 mm (12,86 × 15,07 × 3,50") |
| Dimensions with wall mount | 326,6 × 382,7 × 105,5 mm (12,86 × 15,07 × 4,15") |
| Weight with wall mount | 3.8 kg (8.38 lb) |
| Weight without wall mounting | 3.4 kg (7.50 lb) |
| Maximum energy consumption | 40W (excluding PoE output power) |
| Power input | (1) Terminal block DC or (2) RJ45 (ports 1 and 2) (Protection against self-correcting polarity at the DC terminal ORed protection on all power inputs) |
| Power supply | Min. 54 V / 0.8 A (excluding power supply at PoE output) |
| VDC input | 54 V / 6A |
| Passive PoE input | 2) 54 V / 1,5A, 4 pairs (+1, 2, 4, 5; - 3, 6, 7, 8) Passive PoE, ports 1 and 2 |
| PoE passive output | (4) 54 V or 24V /1.4A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) Passive PoE, ports 1-4 (12) 802.3af/at or 24V/0.7A, 2 steam (+ 4, 5; - 7, 8) Passive PoE, ports 5 to 16 |
| Power monitoring | (1) DC terminal block, input power supply (2) RJ45, ports 1 and 2, PoE input or output power. (14) RJ45, ports 3 to 16, PoE output power |
| Voltage range supported | +42 to +56VDC (-48 V is NOT supported) |
| Button | Reset |
| Serial console port | (1) RJ45 Serial port |
| Data Ports | (16) 10/100/1000 RJ45 (2) 1/10 Gbps SFP+ |
| Certificates | CE, FCC, IC |
| Operating temperature | -40 to 65° C |
| Operating humidity | 10 - 90% |
| Pole/wall mounting | Yes |
EP-S16 is set to DHCP by default, so it will try to get an IP address automatically. If this fails, it will use the default backup IP address, 192.168.1.2
Use one of the following methods:
- Configure the DHCP server to give a specific IP address to EP-S16 based on the MAC address.
- Allow EP-S16 to get an IP address and then check the DHCP server. Use the UBNT Discovery Tool to check which IP address has been assigned.
1. Start a web browser. Enter the appropriate IP address in the address field. Press Enter
2. The login screen will appear. Enter Ubnt in the User name and password field. Click Sign In. 
Operating temperature: -40 to 65° C
Management: CLI - Command Line Interface, via web browser,
