EN
Teltonika 's RUTX50 is a future-proof, multi-network industrial router offering 5G mobile communications for high-speed, data-intensive applications. The RUTX50 is equipped with 5 Gigabit Ethernet ports, WiFi, Dual-SIM, GPS, a powerful processor and RutOS software for advanced networking solutions.
5G dual SIM cellular communications combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enable reliable data transfer with ultra-low latency. The power of 5G technology combined with a wide range of interfaces and industrial hardware features ensures adaptability for future upgrades and expansions
The RUTX50 comes with RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with Remote Management System (RMS), providing optimized remote management and monitoring capabilities for large fleets of equipment .
Mobile network | |
Mobile module | 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G - 42 Mbps DL, 5.76Mbps UL |
Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, combined bandwidth, IMSI, ICCID |
SMS/Call | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto responder, call tools |
USSD | Supports sending and reading unstructured ancillary service data messages |
Black/White list | Black/white list of operators |
Bandwidth management | Band lock, display status of used bandwidth |
APN | Auto APN |
Bridge mode | Direct connection (bridge) between the mobile ISP and the device on the LAN |
Passthrough | The gateway assigns its mobile WAN IP address to another device on the LAN |
Multiple DAPs | Ability to use different PDNs for multiple network accesses and services |
Wireless networks | |
Wireless mode | 802.11b/g/n/ac Wave 2 (WiFi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO), high-speed 802.11r transition, access point (AP), station (STA) |
Wi-Fi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation. |
ESSID | ESSID stealth mode |
Wi-Fi users | Up to 150 simultaneous calls |
Wireless access point | Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page |
Wireless mesh/roaming | Wireless mesh (802.11s), fast roaming (802.11r) |
Ethernet | |
WAN | 1x WAN (can be configured for LAN) 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports Auto MDI/MDIX |
LAN | 4 x RJ45 port, 10/100/1000 Mbps, supports auto crossover MDI/MDIX |
Network | |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL). |
Routing | Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall | Port forwarding, traffic rules, custom rules |
DHCP | Static and dynamic IP allocation |
DDNS | >25 service providers supported, others can be configured manually |
Security | |
SSHFS | Ability to mount a remote file system via SSH protocol |
Authentication | Shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via Web.UI, Unlimited firewall configuration via CLI, NAT, NAT-T |
Preventing attacks | DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention), Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks). |
VLAN | Port-based and tag-based VLAN separation |
Mobile limit control | Setting custom data limits for the SIM card |
WEB Filter | Black list to block unwanted websites, white list to determine allowed sites |
Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filters |
VPN | |
OpenVPN | Ability to run multiple clients and servers simultaneously, 12 encryption methods |
OpenVPN encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
GRE | GRE tunnel |
IPsec | IKEv1, IKEv2, supports up to 5 x IPsec VPN tunnels (instances) with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
SSTP | SSTP client instance support |
STUNNEL | Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code |
DMVPN | A method for building scalable IPsec VPN networks |
PPTP, L2TP | Client/server services can run simultaneously, L2TPv3 support |
WireGuard | WireGuard VPN client and server support |
ZeroTier | ZeroTier VPN |
Modbus TCP Slave | |
ID filtering | Reply to one identifier in the range [1;255] or any |
Allow remote access | Allow access over WAN |
Custom registers | A custom MODBUS TCP register block that allows reading/writing to a file inside the router and can be used to extend the functionality of the MODBUS TCP slave |
Modbus TCP Master | |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MQTT Gateway | |
Gateway | Enables sending commands and receiving data from MODBUS Master via MQTT broker |
DNP3 | |
Supported modes | TCP Master, DNP3 Outstation |
Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
Data to Server | |
IoT platforms | |
The cloud of things | Allows monitoring of: Device data, Mobile data, Network information, Availability |
ThingWorx | Allows you to monitor: WAN type, WAN IP Mobile carrier name, Mobile signal strength, Mobile network type |
Cumulocity | Allows you to monitor: Device model, revision and serial number, Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP. |
Azure IoT Hub | It can send device IP, number of bytes sent/received/ 3G connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number, connection type, temperature, Azure IoT Hub server PIN number. |
Monitoring and management | |
Web.UI | HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log |
FOTA | Remote firmware update from server, automatic notifications |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET |
Call | Restart, status, mobile data on/off, output on/off |
TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem |
MQTT | MQTT Broker, MQTT publisher |
SNMP | SNMP (v1, v2, v3), SNMP trap |
JSON-RPC | API management over HTTP/HTTPS |
MODBUS | MODBUS TCP status/control |
RMS | Teltonika Remote Management System (RMS) - Teltonika Remote Management System |
System parameters | |
CPU | Quad-core ARM Cortex A7, 717 MHz |
Flash memory | 256 MB (80 MB available for user space) |
RAM | 256 MB (100 MB available for user space) |
Software/Configuration | |
Web.UI | Update software from file, check software on server, configuration profiles, configuration backup |
FOTA | Software update |
RMS | Software/configuration update for multiple devices |
Save settings | Software update without losing current configuration |
Software customization | |
Operating system | RutOS (OpenWrt based Linux OS). |
Supported languages | Busybox shell, Lua, C |
Development tools | SDK package with build environment provided |
Location tracking | |
GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA | NMEA 0183 |
Server software | Supported Server Software TAVL, RMS |
Geofencing | Configurable multiple geofence zones |
USB | |
USB standard | USB 2.0 |
Applications | Samba sharing, USB-to-serial, Modbus gateway |
External devices | Ability to connect external hard drive, flash memory, additional modem, printer |
Recording formats | FAT, FAT32, NTFS |
Inputs/Outputs | |
Inputs | 1 x digital input, 0-6 V detected as logic low state, 8-30 V detected as logic high state |
Outputs | 1 x digital output, open collector output, max output 30 V, 300 mA |
Event handling | SMS, Email, RMS |
I/O juggler | Allows you to set certain I/O conditions to initiate an event |
Connector | 4-pin industrial DC power connector |
Input voltage range | 9 - 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max |
PoE (passive) | Mode B, LAN1 Port, 9 - 50 VDC |
Power consumption | Idle: <4 W, Max: <18 W |
Physical interfaces (ports, LED, antennas, buttons, SIM) | |
Ethernet | 5x RJ-45, 10/100/1000 Mbps |
I/O | 1 x digital input, 1 x digital output on 4-pin power connector |
LEDs | 3 connection status LEDs, 3 connection strength LEDs, 10 Ethernet port status LEDs, 4 WAN status LEDs, 1 power LED, 2 LEDs for 2.4G and 5G WiFi |
SIM | 2 x SIM socket (Mini SIM - 2FF), 1.8 V/3 V |
Power supply | 1 x 4-pin DC power connector |
Antennas | 4 x SMA for mobile devices 2 x RP-SMA for WiFi 1 x SMA for GNSS |
USB | 1 x USB A port for external devices |
Reset | Restart button/restore user default settings/restore factory settings |
Other | 1 x grounding screw |
Physical characteristics | |
Housing material | Aluminum housing |
Dimensions | 132 x 44.2 x 95.1 mm |
Weight | 533 g |
Mounting options | DIN rail (can be mounted on two sides), placement on flat surface |
Work environment | |
Ambient temperature range during operation | -40 °C to 75 °C |
Ambient humidity during operation | 10% to 90%, non-condensing |
Protection class | IP30 |