Tracker FMP100 is a 2g device with Bluetooth support. Install it in seconds and use it for both business and personal travel. When you turn on business mode, your routes and hours will be tracked in the logbook. When you are done working, Switch to private mode and tracking records will not be recorded.
For your convenience, an RGB LED indicator shows the current status of the device. In addition, the FMP100 has a built-in configurable buzzer that can be used to notify drivers in various usage scenarios such as ECO driving, speeding or excessive idling.
| Module | |
| Model | Teltonika TM2500 |
| Technology | GSM/GPRS/GNSS/BLUETOOTH |
| GNSS | |
| GNSS | GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS |
| Receiver | 33 channel |
| Tracking sensitivity | -165 dBM |
| Position accuracy | < 2,5 m |
| Hot start | < 1 s |
| Warm start | < 25 s |
| Cold start | < 35 s |
| Mobile network | |
| Technology | GSM |
| 2G bands | Quad-band 850/900/1800/1900 MHz |
| Data transfer | GPRS Multi-Slot Class 12(up to 240 kbps) |
| Data handling | SMS (text/data) |
| Power supply | |
| Input voltage range | 10-30 V DC with overvoltage protection |
| Spare battery | Li-Ion rechargeable battery 170 mAh 3.7 V (0.63 Wh) |
| Bluetooth | |
| Specification | 4.0 LE |
| Supported peripherals | Temperature and humidity sensor, headset, Inateck barcode scanner, support for universal BLE sensors |
| Physical specification | |
| Dimensions | 96.7 mm x 33.4 mm x 27.5 mm (L x W x H) |
| Interfaces | |
| Connectivity | Car lighter socket |
| GNSS antenna | Internal with high profit |
| GSM antenna | Internal with high profit |
| USB | 1 x USB 2.0 Micro-USB for configuration 1 x USB type A for charging external devices (5V 1A) |
| LED signalling | RGB LED |
| SIM | Nano-SIM |
| Memory | 128MB internal flash memory |
| Work environment | |
| Operating temperature (without battery) | -40 °C to 85 °C |
| Storage temperature (without battery) | -40 °C to 85 °C |
| Operating humidity | 5% to 95% non-condensing |
| Battery charging temperature | 0 °C to 45 °C |
| Battery discharge temperature | -20 °C to 60 °C |
| Battery storage temperature | -20 °C to 45 °C for 1 month -20 °C to 35 °C for 6 months |
| Features | |
| Sensors | Accelerometer |
| Scenarios | Eco driving, speeding detection, jamming detection, GNSS fuel meter, excessive idling detection, disconnection detection, towing detection, collision detection, automatic geofence, manual geofence, travel |
| Sleep modes | GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep |
| Configuration and firmware upgrade | FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application |
| SMS | Configuration, events, debugging |
| GPRS commands | Configuration, debugging |
| Time synchronization | GPS, NITZ, NTP |
| Ignition detection | Accelerometer, external supply voltage |
1 Insert the SIM card tray removal tool into the hole on the SIM card tray, then push until the tray pops out.
2 Insert the Nano-SIM card as shown with PIN request disabled. Make sure the Nano-SIM card is properly placed in the tray.
3 Put the SIM card tray back in.
When the setup is complete, refer to "Connecting to a PC (Windows)".
