Tinycontrol | Rain sensor | 1x analog, 1x digital
CODE: LANKON-036
EN
The sensor's task is to detect and measure rainfall. It has two outputs - one analogue and one digital, used depending on the demand. The digital output can take one of two states '0' or '1'. Analogue output allows to monitor rainfall intensity on the principle of voltage reading. The sensitivity of the module can be regulated by a potentiometer on the PCB.
Technical parameters | |
Supply voltage | 3.3V- 5 V |
Outputs | Digital x1 Analogue x1 |
Dimensions | A module: 30 x 16 mm The probe plate: 54 x 40 mm |
The module is connected with an optional cable terminated with a 2.54mm rechargeable plug. Pinout descriptions can be found on the board.
There is a mounting hole in the board through which the module can be fixed to the ground with optional posts.