Uninterruptible power supplies of the UPS type provide short-term operation of home or office equipment in the event of a power cut in the general network. Operating in normal mode, UPSs, thanks to their built-in AVR, act as a voltage stabilizer. The voltage range of the mains supply is 162 to 290V. ORVALDI V(L) 1.1kVA to 3KVA with a power factor of 0.9, provides servers with full power protection from power failures as well as from the effects of power surges and peaks.
With the added advantage of a universal rack / Tower enclosure and a clear and easy-to-use LCD, the Orvaldi V2000 Sinus 2U LCD is ideal for networking, telecommunications, servers and critical applications.
| Features / filters | |
| Battery voltage in UPS | 12V |
| UPS power (VA) | 2000 |
| AC outlet types | IEC 320 |
| AC outlets quantity | 8 |
| Audible alarm modes | Alarm when on battery, Battery replacement, Fault, Overload alarm |
| Audible alarm(s) | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| Battery capacity | 9 |
| Battery voltage | 12 |
| Cold start | Yes |
| Crest factor | 3:1 |
| Depth | 510 |
| Display type | LCD |
| ECO mode | Yes |
| Efficiency | 91 |
| Efficiency (ECO mode) | 97 |
| Emergency Power Off (EPO) | Yes |
| Form factor | Rackmount/Tower |
| Height | 88 |
| Input frequency | 50/60 |
| Input operation voltage (max) | 290 |
| Input operation voltage (min) | 162 |
| LED indicators | Yes |
| Noise level | 55 |
| Number of batteries supported | 4 |
| Operating relative humidity (H-H) | 0 - 90 |
| Operating temperature (T-T) | 0 - 40 |
| Output frequency | 50/60 |
| Output operation voltage (max) | 240 |
| Output operation voltage (min) | 220 |
| Output power | 1800 |
| Output power capacity | 2 |
| Output voltage regulation | 25 |
| Power factor | 0.9 |
| Power protection features | Overcharge, Overdischarge, Overload |
| Product colour | Black |
| Rack capacity | 2U |
| Response time | 10 |
| Serial interface | Yes |
| Serial interface type | RS-232 |
| Serial ports quantity | 1 |
| UPS topology | Line-Interactive |
| USB port | Yes |
| Waveform | Sine |
| Weight | 21.5 |
| Width | 438 |
| Technical data | |
| Model | ORVALDI V2000 sinus 2U LCD |
| Power | 2000 VA / 1800 W |
| Voltage | 208/220/230/240 VAC |
| Adm. input voltage | 162-290 VAC |
| Adm. frequency range | 50 Hz |
| Voltage Selection (AC Mode) | 208/220/230/240 VAC |
| Stabilization (Batt. Mode) | ± 3% (before battery alarm) |
| Frequency (Batt. Mode) | 50 Hz ± 1 Hz |
| Current Crest Ratio | 3:1 |
| Harmonic distortion | 8% max @ 100% linear load, 15% max @ 100% non-linear load (before alarm) |
| Voltage shape (Batt. Mode) | Pure sine wave |
| Switchover time | Typically 2-6 ms, 10ms max |
| AC Mode | 97% |
| Buck | 90% |
| Battery Mode | 83% |
| Type and quantity | 12 V/9 Ah x4 |
| Charge voltage. | 54.8 VDC ± 1% |
| Typical charging time | 4 hours to 90% capacity |
| Full security | Against overloading, discharging, overcharging |
| Option - SNMP card | Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and MAC |
| RS-232/USB communication | Power management from SNMP manager and web browser |
| LCD panel | AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery. |
| Battery Mode | Signal every 10 sec. |
| Low Battery | Signal every second |
| Overload | Signal every 0.5 seconds |
| Fault | Continuous signal |
| Dimensions ( D x S x W ) | 480 x 438 x 88 |
| Weight | 23.1 |
| Moisture | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise level below | 45dB |
