VOLT SINUS PRO UPS 800W 12V 10A | Power supply | 800W
![](https://www.batna24.com/img2/1000/298650_1.webp?20989284238)
EN
VOLT SINUS PRO UPS 800W is a computer emergency power supply from the SINUS PRO series, the device combines high-performance pure sine wave DC/AC converters. In case of voltage loss from 230V mains or photovoltaic, the device switches to battery mode, which allows for further operation of the system and protection against irretrievable data loss.
The feature that distinguishes sine fault power supplies from cluster simple AC/DC converters is output voltage generation of a pure sine waveform, identical to that in the power network. The device includes DC/AC pure sine wave, UPS emergency switch, mains voltage stabiliser (AVR), battery charger (charger) and the necessary protection for the operation of the device together with the solar controller and photovoltaic. Thanks to the use of a colour display, the device allows you to monitor the most important operating parameters of the system. The power supply is from a series of emergency power supplies type "line-interactive".
Technical data | |
Rated power (continuous) | 500 W |
Overload power (momentary) | 800 VA |
Battery voltage / -ów | 12 V |
Rectifier (charging current) | 10 A |
PV charging voltage | ~ 18V 12 - 25 V |
Solar controller | None |
Automatic mains voltage regulator - AVR | 140 - 275 VAC |
Idle current (no load) | 0,3 A ≤ Idle current ≤ 1,5 A |
Permissible supply voltage range | Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V) |
Supply voltage frequency | 45 Hz ~ 65 Hz |
UPS output voltage frequency | 50 Hz (+- 0.5 Hz) |
Output voltage range | AVR mains voltage regulator: 204 - 240 V, UPS - battery: 230 V (+- 3%) |
Overload protection (battery power supply) | In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately. |
Overload protection (mains supply) | The device warns of overload until the fuses are tripped. |
Permissible humidity | 10 % RH ~ 90 % RH |
Permissible operating temperature | 0 ~ 40 °C |
Dimensions | 260 mm x 150 mm x 280 mm |
Weight | 6 kg |
SINUS PRO series converters are designed for office and home applications, they should not be used together with special equipment, the failure of which could cause material damage or threaten life (e.g. industrial and medical equipment).
Do not overload the device. Operation under load greater than shift load may damage the inverter.