Extralink Piorun 800VA/640W Inverter + Extralink LiFePO4 12.8V 60Ah Battery Set | UPS | Pure sine wave, 12.8VDC battery voltage + maintenance free
![](https://www.batna24.com/img2/1000/334180_167638.webp?20989284238)
EN
The inverter can operate as an uninterruptible power supply (UPS) in combination with Extralink 12V batteries. In the event of a power outage, UPS mode provides uninterrupted power. The inverter charges the batteries so that they are ready to operate in emergency situations when mains power is available. The inverter provides fast switching and uninterrupted power by switching to battery power in the event of a mains power interruption. UPS mode is a great way to power important devices such as servers, routers and security systems that need uninterrupted power to function properly. You can rest assured that your important devices will always be powered, even during extended power outages, thanks to the UPS mode of our inverter and 12V Extralink batteries.
The Extralink Lightning Inverter with pure sine wave meets all energy requirements for power supply. In the event of a power outage, our inverter quickly switches from mains power to battery power. Extralink Lightning also has multiple layers of protection to ensure safe and reliable operation. This includes protection against overload, overvoltage, short circuit and over temperature. The Extralink inverter and Extralink batteries create a stable UPS backup power system.
Compared to traditional battery-based solutions made with other technologies, Extralink LiFePO4 lithium-iron-phosphate batteries have many advantages: longer life, no maintenance, exceptional safety, lightweight, better discharge and charging efficiency. No active maintenance is required to extend the life of Extralink LiFePO4 batteries. In addition, these batteries have no memory effect and can be stored for longer periods of time due to their low self-discharge rate (less than 3% per month).
The ability to produce a pure sine wave at the output of an inverter is one of its most important features. This means that the quality and stability of the alternating current produced by the inverter is the same as that supplied by the power grid. A pure sine wave is essential for powering sensitive electronic devices such as laptops, refrigerators, televisions, and the most sensitive devices such as furnaces, CO pumps and medical equipment, which are susceptible to damage from inconsistent or unstable power supply. You can rest assured that your electronic devices run smoothly and efficiently, without risk of damage, thanks to the pure sine wave output of our inverter.
LiFePO4 batteries retain an average of 80% of their rated capacity and last for more than 2,000 cycles. The ability to discharge LiFePO4 batteries to a lower level does not affect their performance or service life, allowing them to be fully utilized, increasing their available capacity. Extralink LiFePO4 can maintain high performance even under extreme temperature conditions, as they have high heat resistance and can operate over a wider temperature range.
Technical data Bolt | |
Instantaneous power | 800 VA |
Constant power | 640 W |
Battery voltage | 12 V |
AC input | |
Voltage | 145V~275V |
Frequency | 45Hz~65Hz |
AC output | |
Voltage | 220V±3% (Battery mode) |
Frequency | 50/60Hz ± 0.5 |
Output run | Pure sine wave |
Total harmonic distortion (THD) | ≤±3% |
Battery charging current | 8 A |
Display | LCD |
Transfer time | <4ms |
Environment | |
Noise | ≤55dB |
Temperature during operation | 0 ~ 40°C |
Moisture | 10 ~ 90% (non-condensing) |
Efficiency | ≥85% |
Security | |
Overload | Overload exceeds 110%, automatic shutdown in 30 seconds Overload exceeds 120%, automatic shutdown in 2 seconds." In mains power mode, only maintain alarm, but not shutdown |
Short circuit | Output short-circuit, automatic shutdown after holding sound 20 sec |
Battery | High and low voltage protection |
Reverse polarity | Protection against reverse polarity ( optional) |
Physical parameters | |
Dimensions | 290 x 255 x 120 mm |
Net weight | 7.52 kg |
Alarm | |
Battery mode | No alarm sound if it operates normally in main power mode, When the main power supply is cut off, it goes into battery mode, maintaining the sound 4 times every 30 seconds |
Low battery voltage | A sound that persists every few seconds when the battery voltage is low; A distinct sound when the device malfunctions |
Overload | Maintaining sound every second on overload |
Electrical characteristics of LiFePO4 | |
Nominal voltage | 12.8V |
Rated capacity | 60.0Ah (C5.25°C) |
Total energy | 768Wh |
Internal resistance | ≤30 mΩ |
Lifespan | Over 2000 cycles at 1C 100% DOD |
Monthly self-discharge | <3% |
Charging efficiency | 100% @ 0.5C |
Discharge efficiency | 96-99% @1C |
Charging parameters | |
Charging voltage | 14,6 ± 0,2 V |
Charging current | 30A |
Max. charging current | 60A |
Charge cut-off voltage | 15.6 V ± 0.2 V |
Discharge parameters | |
Rated discharge current | 30A |
Maximum continuous discharge current | 60A |
Max. discharge current | 180A (<1s) |
Discharge cut-off voltage | 10V |
Charging temperature | 0°C to 45°C (32F to 113F) at 60±25% relative humidity |
Discharge temperature | -20°C to 60°C (-4F to 140F) at 60±25% relative humidity |
Storage temperature | 0°C to 40°C (32F to 104F) at 60±25% relative humidity |
Water and dust resistance | IP65 |
Mechanical parameters | |
BMS | Yes |
Housing | ABS plastic |
Dimensions | 197 x 165 x 170 mm |
Weight | 6.9 kg |
Terminal | M8 |