EN
Fast and powerful - ideal for urban and suburban locations. Access point MIMOSA A5 with unique MIMO quad panel technology offers unprecedented communication quality in dense network environments.
More capacity with less interference! MIMOSA presents a directional MIMO antenna built of four independent panels covering a 90º area, transmitting data only towards the actual customer's location.
A client device reaching 500 Mbps and an access point reaching 1.5 Gbps are able to deliver both home or business speeds so far reserved only for fibre optic connections. All this at a fraction of the price and installation time of the latter.
Large possibilities and yet nice and slender housing. The A5-14 will make installation on any roof easy and fast, and additionally discrete and aesthetic.
Precise synchronization of the Mimosa A5 access point transmissions via GPS technology reduces interference and allows multiple use of one channel in the network. The proprietary TDMA protocol significantly improves transmission compared to classic WiFi. It eliminates network collisions and allows the access point to always reach its full potential. AGC (Auto Gain Control) cuts below threshold interference, another MIMOSA technique that maximizes client station performance. All of this is encapsulated in a high class IP67 enclosure to withstand the harshest weather conditions.
Performance | |
Max. throughput | Up to 1.0 Gbps IP (1.7 Gbps PHY) |
Number of supported client stations | 100 in Interop WiFi mode; 44 in SRS mode |
Modes of operation | WiFi Interop; SRS - Mimosa GPS Sync (TDMA) |
Radius of coverage | Recommended maximum 300 m for optimum performance |
Radio | |
MIMO and modulation | 4x4:4 MIMO; OFDM to 256-QAM |
Bandwidth | 20/40/80 MHz |
Operating frequency range | GPS Sync: 4900-6200 MHz WiFi Interop: 5170-5835 MHz |
Antenna | |
Profit | 14 dBi |
Beam width (3 dBm) | 70º horizontal, 16º vertical |
Ratio of primary to secondary radiation | >30 dB |
Inter-polarisation insulation | >20dB |
Polarisation | Kolowa |
Power supply | |
Max power consumption | 25 W |
Power supply | 802.3at or Passive PoE compliant |
Surge protection | 6 kV |
Power supply | Compliant with 802.3at or Passive PoE, 48-56 V with surge protection according to IEC61000-4-5 (power supply included) |
Physical characteristics | |
Dimensions | Height 314 mm Width 142 mm |
Weight | 1.75 kg |
Case | External UV-resistant |
Degree of protection | IP67 |
Ports | Gigabit Ethernet - 10/100/1000BASE-T |
Certification | FCC Part 15.407 and Part 90Y, IC RSS210, CE, ETSI 301 893/302 502, RoHS, UL/EC/EN/ 60950-1 + CSA-22.2 |