MikroTik S+C55DLC10D is a single-mode SFP+ insert dedicated for fiber optic connections over distances up to 10 km. It transmits data at 10 Gbps on a single-mode fiber. SFP+ S+C55DLC10D module operates at 1550 nm. It has 2 LC ports and supports CWDM technology.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Digital Diagnostics Monitoring (DDM) | Yes |
| Fiber optic connector | LC |
| Fiber ports quantity | 2 |
| Fiber type | SM (Single-Mode) |
| Interface type | SFP+ |
| Maximum data transfer rate | 10000 |
| Number of products included | 1 |
| Product colour | Nickel |
| SFP transceiver standard | CWDM |
| SFP transceiver type | Fiber optic |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1550 nm, 1550, |
| Basic technical parameters | |
| Type of module | SFP+ |
| Transmission speed | 10 Gbps |
| Distance | 10 km |
| Type of transmission | Single-Mode |
| Kind of asshole | CWDM |
| Output connectors | 2 x LC |
| Wavelength | 1550 nm |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
First we check if the ports in the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
