The MikroTik SFP+ 10G S+31DLC10D module is a single-mode SFP+ insert equipped with 2 LC optical connectors. It enables transmission at a speed of 10 Gbps over a distance of to 10 km. SFP+ fiber optic module has a wavelength of 1310 nm. Microtik S+31DLC10D is compatible with other products of this company, such as CCR1036-8G-2S+ and CCR1036-8G-2S+EM, as well as with devices of other manufacturers.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Auto MDI/MDI-X | No |
| Fiber optic connector | LC |
| Fiber type | SM (Single-Mode) |
| Harmonized System (HS) code | 85369010 |
| Interface type | SFP+ |
| Maximum data transfer rate | 10000 |
| Maximum transfer distance | 10000 |
| Number of products included | 1 |
| SFP transceiver type | Fiber optic |
| Single-mode fiber (SMF) supported | Yes |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1310 nm, 1310, |
| Basic technical parameters | |
| Type of module | SFP+ |
| Type of transmission | Single-Mode |
| Port | 2 x LC |
| Transmission speed | 10 Gbps |
| Distance | 10 km |
| Wavelength | 1310 nm |
| Supported cabling | Single mode optical fibre 8.3/125, 8.7/125, 9/125, 10/125 µm |
| Operating temperature | -40°C~70°C |
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
SFP+ is an extension of the SFP standard adapted for transmission speeds of 10 Gbit/s.
