MikroTik RB750 | Router | 5x RJ45 100Mb/s

EN
RB750UP is a small five-port Ethernet router in a nice plastic housing with USB 2.0 port and PoE output. Ports 2-5 can power other PoE-enabled devices with the same voltage as the device. Less power supplies and cables to worry about! Maximum current is 500mA per port, the Ethernet ports are shielded.
It is inexpensive, small, good-looking and easy to use. No more compromises between price and functionality, the RB750 series has both! Its compact design and clean appearance make it a perfect fit in any home environment.
Basic technical parameters | |
Processor | AR7241 400MHz |
Memory | 32MB SDRAM DDR |
Boot loader | RouterBOOT |
Data memory | 64MB |
Ethernet | (5) 10/100 Mbit/s Fast Ethernet ports with Auto-MDI/X. Hardware switch and mirror port support. |
Appendices | One USB 2.0 port, reset switch |
LEDs | Power supply, NAND activity, 5 Ethernet LEDs |
Power options | PoE 8 - 30 V DC on Ether1 Socket 8 - 30 V DC |
Power output | PoE output on ports 2-5. Max. current 500 mA per port |
Dimensions | 113×89×28 mm |
Weight | 130g |
Electricity consumption | Up to 3W |
Operating system | MicroTik RouterOS, Level4 license |
The packaging contains | RouterBOARD in a plastic housing, 24V 2.5A power supply. |
RouterBOARD is a hardware platform from MikroTik, which is a line of routers with RouterOS operating system. Almost all models of RouterBOARD devices can be powered via Ethernet (PoE) and have a connector for external power source.
Look for the reset button marked "RES" on the MikroTik router. Then turn off the power to the device. Hold down the reset button and do not release it. Turn on the device power and wait for the "ACT" LED to flash. Finally, release the button to clear the configuration.
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.