EN
EOL

MikroTik LHG LTE6 kit | LTE Router | RBLHGR&R11e-LTE6, LTE 300Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM

CODE: RBLHGR&R11E-LTE6 / EAN: 4752224004109

MikroTik LHG LTE6 kit | LTE Router | RBLHGR&R11e-LTE6, LTE 300Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM

CODE: RBLHGR&R11E-LTE6 / EAN: 4752224004109
150,77 GBP without VAT (net)
Out of stock
Communication type: 4G/LTE
Number of LAN ports: 1x 10/100BaseTX (RJ45)
Wireless network standards: HSPA+
Show more parameters

About product

MicroTik LHG LTE6 kit

MikroTik RouterBoard LHG LTE6 kit is a new model from the LHG MikroTik series adapted for 2G, 3G and LTE networks (cat. 6). LHG LTE6 kit is a set consisting of a radio integrated with an antenna with energy gain 17 dBi. Mount it on the outside, on a pole, mast or any high construction and connect even where mobile phones fail. Due to the large size of the high gain antenna, the LHG LTE6 set can connect to mobile towers in extremely rural locations, giving you the ability to provide last mile Internet access where nothing else is available.

MicroTik LHG LTE6 kit

MicroTik LHG LTE6 kit

The new LHG LTE6 kit is equipped with a CAT6 LTE modem, which allows aggregation of operators and allows the device to use multiple bands simultaneously. This is a great advantage when there are many LTE users in the area. This provides better response in a crowded environment and greater efficiency in case of weaker signal situations in the countryside.

MicroTik LHG LTE6 kit

MicroTik LHG LTE6 kit

LHG routerBoard is equipped with one SIM slot, QCA9531 processor with 650 MHz clock, and 64 MB memory RAM. Maximum theoretical throughput (in LTE cat. 6) is 300 Mb/s when downloading data and 50 Mb/s when sending data. The kit includes the necessary mounting accessories and a power supply with a PoE injector. The device has a RouterOS system with Level 3 license.

MicroTik LHG LTE6 kit

The most important features:

  • Power supply PoE 12 - 57 V DC (passive or 802.3af/at)
  • Beam width: 25°
  • 1x SIM slot
  • Maximum throughput: 300 Mb/s (downlink), 50 Mb/s (uplink)
  • RouterOS level 3
  • Aggregation of bands
  • Energy gain 17 dBi
  • 1x 10/100 Mb/s fast Ethernet port
  • Operation in 2G, 3G, LTE bands (cat 6)

Specification

Features / filters
Communication type 4G/LTE
LTE category Cat.6 (300Mb/s Download, 50Mb/s Upload)
Number of LAN ports 1x 10/100BaseTX (RJ45)
Wireless network standards HSPA+
2G bands supported 850,900,1800,1900
3G bands supported 850,900,1900,2100
4G FDD-LTE bands supported 700,800,850,900,1800,1900,2100,2600
4G TDD-LTE bands supported 2600
Additional connectors / interfaces SIM
Antenna gain 11dBi - 20dBi
Certification CE/RED, EAC
Data network 2G, 3G, LTE
Depth 227
Ethernet LAN (RJ-45) ports 1
Height 391
Input voltage 12 - 57
Internal memory 64
LTE bands B1 (2100MHz), B2 (1900MHz), B3 (1800MHz), B7 (2600MHz), B8 (900MHz), B20 (800MHz), B5 (850 MHz), B12 (700MHz), B17 (700MHz), B25 (1900MHz), B26 (850MHz),
Manual Yes
Operating temperature (T-T) -30 - 60
Power consumption (typical) 6
Power source type PoE
Processor cores 1
Processor frequency 650
Processor model QCA9531
Product colour Grey, White
RAM memory 64MB
SIM card support Yes
SIM card type MicroSIM
Storage capacity 16
Storage media Flash
Sustainability certificates RoHS
Type Outdoor cellular signal booster
Type of device power supply PoE 802.3af/at, Passive PoE,
Width 391

Basic technical parameters:
Product code RBLHGR and R11e-LTE6
Architecture MIPSBE
CPU QCA9531
Number of processor cores 1x
Nominal processor frequency 650 MHz
Licence level 3
Size of RAM 64 MB
Storage size 16 MB
Type of storage FLASH
Tested ambient temperature From -30 ° C to 60 ° C
Number of SIM sockets 1x modem (Micro SIM)
MiniPCI-e sockets 1x
SFP port No data
PoE in 802.3af/at
PoE at the input Voltage 12–57 V.
Number of DC inputs 1 (PoE-IN)
Maximum energy consumption 6 W.
Ethernet ports 1 fast Ethernet 10/100 Mb/s port
Energy gain of the antenna 17 dBi
Width of the main beam 25°
Mobile network
Category 2G Class 12
Category 3G R7 (link down 21 Mb / s, link up 5.76 Mb / s) / R8 (link down 42.2 Mb / s, link up 5.76 Mb / s)
LTE category 6 (sending link 300 Mb / s, sending link 50 Mb / s)
LTE FDD bands 1 (2100 MHz) / 2 (1900 MHz) / 3 (1800 MHz) / 7 (2600 MHz) / 8 (900 MHz) / 20 (800 MHz) / 5 (850 MHz) / 12 (700 MHz) / 17 (700 MHz) / 25 (1900 MHz) / 26 (850 MHz)
LTE TDD bands 38 (2600 MHz) / 40 (2300 MHz) / 39 (1900 MHz) / 41n (2500 MHz)
2G teams 2 (1900 MHz) / 3 (1800 MHz) / 5 (850 MHz) / 8 (900 MHz)
3G bands 1 (2100 MHz) / 2 (1900 MHz) / 5 (850 MHz) / 8 (900 MHz)
Set composition LHG LTE6, 24V power supply, 0.38A, PoE injector, 2 metal clamps, K-LHG assembly kit

Support

Downloads

Brochure (ENG) Download
Short guide (ENG) Download

Faq

What is the PoE power supply for ?

PoE allows you to use a single cable for power and data transmission, saving you money on purchasing and dragging cables for network devices and VoiP phones.

What is a MicroTik RouterOS?

MikroTik RouterOS is the operating system of the router and software that allows the PC or Mikrotik RouterBoard to be a dedicated router.

What types of power supply are there ?

Power supply PoE 12 - 57 V DC (passive or 802.3af/at)

150,77 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.