MikroTik LHG LTE kit | LTE Router | RBLHGR&R11e-LTE, LTE 150Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM

EN
The LHG LTE device is designed for remote locations within the range of a mobile network. It can be mounted outside, on a mast or any other sufficiently high construction and enables connection even where mobile phones cannot. Due to the large antenna with high gain, the device is able to connect to mobile phone towers in extreme locations, giving you access to the Internet.
The device is equipped with one Ethernet port, it has a high quality category 4 modem with throughput up to 150 Mbit/s download and 50 Mbit/s upload.
RBLHGR&R11e-LTE contains LTE modem supporting international LTE bands 1, 2, 3, 7, 8, 20, 38 and 40.
Features / filters | |
Communication type | 4G/LTE |
LTE category | Cat.4 (150Mb/s Download, 50Mb/s Upload) |
Number of LAN ports | 1x 10/100BaseTX (RJ45) |
Operating frequency | LTE |
Additional connectors / interfaces | 1x miniPCI-e |
Data network | 2G, 3G, LTE |
Depth | 227 |
Height | 391 |
Input voltage | 12-57 |
LTE bands | B1 (2100MHz), B2 (1900MHz), B20 (800MHz), B3 (1800MHz), B7 (2600MHz), B8 (900MHz), B38 (2600MHz), B40 (2300MHz), |
Operating temperature (T-T) | -40 - 60 |
Power source type | PoE |
Product colour | Grey, White |
RAM memory | 64MB |
Type | Outdoor cellular signal booster |
Type of device power supply | PoE 802.3af/at |
Width | 391 |
Basic technical parameters | |
CPU | QCA9531 650 MHz |
RAM | 64 MB |
Flash storage | 16 MB |
10/100 fast Ethernet ports | 1 |
LTE antenna gain | 21 dBi |
Antenna beam width | 25° |
LTE category | 4 (150Mbps download, 50Mbps upload) |
3G category | R7 (21Mbps download, 5.76Mbps upload) |
2G category | Class 12 |
Supported input voltage | 12 - 57 V (Passive PoE, 802.3af/at) |
Dimensions | 391 × 391 × 227 mm |
Operating temperature | -40°C ... +60°C |
Operating system | RouterOS |
OS License level | 3 |
Maximum current consumption | 6 W |
SIM socket | 1 (Mini SIM) |
Input PoE | Yes |
When you install RouterOS software or turn on the router for the first time, there are different ways to connect to it:
- Access to command line interface (CLI) via Telnet, SSH, serial cable
- Access to the graphic interface (WebFig)
- Using the WinBox configuration tool (Windows application)
To update your software, you must download the latest package files (*.npk) from our website. Then connect to your router via FTP and upload the new packages to it using the binary transfer mode. Restart your router by issuing the command /system reboot.
Firewall, Routing, MPLS, VPN, Wireless, DHCP, Hotspot, QoS, Proxy and more.