MikroTik LHG 4G kit | LTE Router | RBLHGR&R11e-4G, 4G 150Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM

EN
Mikrotik Routerboard LHG 4G kit is a device designed for remote locations within the range of a mobile network. Mount it outdoors, on a pole, mast or any other structure of appropriate height and connect even where mobile phones cannot. With a large 21dBi antenna with high gain, the device is able to connect to mobile towers in extreme rural locations, giving you the ability to provide Internet access at the last mile where nothing else is available.
The device is equipped with one Ethernet port, it has a built-in high quality Category 4 modem for up to 150 Mbit/s download and 50 Mbit/s upload. The device works on Mikrotik RouterOS level 3 firmware.
RBLHGR&R11e-4G includes an LTE modem supporting FDD 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz) LTE bands and TDDD 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz) LTE bands.
Features / filters | |
Communication type | 4G/LTE |
Number of LAN ports | 1x 10/100BaseTX (RJ45) |
Operating frequency | LTE |
Additional connectors / interfaces | 1x miniPCI-e, SIM, |
Data network | 4G,LTE |
Depth | 227 |
Height | 391 |
Input voltage | 12 - 57 |
LTE bands | B3 (1800MHz), B7 (2600MHz), B20 (800MHz), B31 (450MHz), B41n (2500MHz), B42 (3500MHz), B43 (3700MHz), |
Operating temperature (T-T) | -40 - 60 |
Power source type | PoE |
Product colour | Grey, White |
RAM memory | 64MB |
Type | Outdoor cellular signal booster |
Type of device power supply | PoE 802.3af/at |
Width | 391 |
Basic technical parameters | |
CPU | QCA9531 650 MHz |
Size of RAM | 64 MB |
Flash storage | 16 MB |
10/100 fast Ethernet ports | 1 |
LTE antenna amplification | 21 dBi |
Antenna beam width | 25° |
LTE category | 4 (150Mbps download, 50Mbps upload) |
SIM socket | 1 (Mini SIM) |
Input PoE | Yes |
Supported input voltage | 12 - 57 V (Passive PoE, 802.3af/at) |
Dimensions | 391 × 391 × 391 × 227 mm |
Operating temperature | -40°C ... +60°C |
Licence level | 3 |
Operating system | RouterOS |
Maximum current consumption | 6 W |
Each router is configured at the factory with IP address 192.168.88.1/24 on Ethernet port1. The default user name is admin without password. After the first login, please create a new user with the password in the "full" group, log in again and remove the default admin user.
The reset button has three functions:
- Release the button when the green LED starts flashing to reset RouterOS configuration to the default settings.
- Release the button when the LED turns green to clear the entire configuration and default settings.
- Release the button when the LED is not lit (~20 seconds) for the device to look for Netinstall servers.
(required to reinstall RouterOS over the network).
To update your software, you must download the latest package files (*.npk) from our website. Then connect to your router via FTP and upload the new packages to it using the binary transfer mode. Restart your router by issuing the command /system reboot.