APC 5M-12
The APC 5M-12 delivers the highest performance and stabil- ity available in the 5 GHz CPE class. This product combines a robust IP-65 compliant enclosure with a highly advanced 802.11n radio core containing MIMO 2x2 technology along with an inte- grated mid-gain dual polarization directional antenna. The device is powered by a reliable, advanced, and feature-rich operating system, allowing the creation of very high throughput and stable wireless networks quickly, safely, and effectively. In addition, the APC 5M-12 supports access point operating mode which extends application scenarios and makes the APC 5M-12 suited for both point to point and point to multipoint networks.
Specifications:
Wireless | |
WLAN standard | IEEE 802.11 a/n, iPoll (proprietary) |
Radio mode | MIMO 2x2 |
Operating modes | Access point (auto WDS), Station, Station WDS, iPoll Access Point, iPoll Station |
Radio frequency band | 5.1 - 5.9 GHz (country dependent - FCC 5.745 to 5.825 GHz) |
Transmit power | Up to 29 dBm (country dependent) |
Receive sensitivity | Varying between -95 and -75 dBm depending on modulation |
Channel size | 20, 40 MHz |
Modulation schemes | 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) |
Data rates | 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps 802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps |
Error correction | FEC, Selective ARQ |
Duplexing scheme | Time division duplex |
Antenna | |
Type | Integrated directional dual-polarized panel |
Gain | 12 dBi |
Wired | |
Interface | 10/100 Base-T, RJ45 |
Networking | |
Operating modes | Bridge, Router |
WAN | Static IP, DHCP client, PPPoE client |
NAT | Routing w/ or w/o NAT |
Static routing | Supported |
DHCP | Client, Server, Relay |
Port forwarding | Supported |
VLAN | Supported for management and data |
Softwave | |
General | Ability to define/limit frequency, channel width, EIRP, modulation |
Advanced wireless functionality | ATPC (automatic transmit power control), DFS 3, auto-channel, auto-modulation, |
Operating mode | Router, Bridge |
Wireless operating modes | AP auto WDS, Station, Station WDS, Virtual radios (VSSID), iPoll access point, iPoll client |
Wireless security | WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication) |
Wireless QoS | WMM |
WAN protocols | Static IP, DHCP client, PPPoE client |
Network | NAT, static routing, firewall, port forwarding, VLAN, traffic shaping |
Services | DHCP server, SNMP server, NTP client, Alerts, Remote syslog, Wireless and Ethernet statistics, bandwidth limiting |
Tools | Site survey, Link test, Antenna alignment, Ping, Traceroute, Spectrum analyzer, delayed reboot |
Management | HTTP(S) GUI, SSH CLI, SNMP read, WNMS, troubleshooting file, reset via ICMP |
Physical | |
Dimensions | Length 150 mm (5.9 ‘’), width 115 mm (4.5 ‘’), height 55 mm (2.1 ‘’) |
Weight | 400 g (16.2 oz) |
Power supply | 12 - 48 V DC passive PoE |
Power source | 100 – 240 VAC via included adapter |
Power consumption | 6.5 W |
Environmental | |
Operating temperature | -40°C (-22 F) ~ +65°C (+149 F) |
Humidity | 0 ~ 90 % (non-condensing) |
Management | |
System configuration | User-friendly web GUI, Command line via SSH, centralized Wireless Network Management System, reset via reset tool |
System monitoring | SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap |
Regulatory | |
Certification | FCC/CE/Safety/RoHS compliance |
