Mikrotik wAP ac LTE kit (2024) | LTE Router | wAPGR-5HacD2HnD&EC200A-EU, LTE4, Wi-Fi 5, 2x GbE RJ45, microSIM, IP54
![](https://www.batna24.com/img2/1000/335894_172457.webp?20989284236)
EN
MikroTik wAP ac LTE kit (wAPGR-5HacD2HnD
The wAP ac LTE kit is equipped with two gigabit Ethernet ports, allowing you to use the built-in LTE modem, which supports 2G, 3G and 4G (LTE Cat. 4) connections. This allows you to enjoy a reliable backup mobile Internet connection, even if you already have a wired ISP. The new version of the device includes the R11eL-EC200A-EU LTE modem, which offers better connectivity and supports the additional B28 band, resulting in a lower price and better connection quality.
The WAP ac LTE kit is designed to withstand harsh outdoor conditions. It can be attached to any outdoor wall, and the lower part of the device can be secured with a special anti-vandal screw. Thanks to a hole in the back of the housing, the Ethernet cable can be routed directly behind the device, minimizing the visibility of the installation. The WAP ac LTE kit can be wall-mounted, ceiling-mounted, pole-mounted or placed on a flat surface, thanks to the included stand and mounting brackets.
The device's LTE module is connected to two indoor antennas via U.FL pigtails, allowing the connection of an external LTE antenna for increased coverage. The device can be powered by passive PoE or 802.3af/at and a DC outlet. The maximum theoretical throughput of the LTE connection is 150 Mbps when downloading data and 50 Mbps when uploading data, which supports multiple bands for wide availability.
The MikroTik wAP ac LTE kit is equipped with a 716 MHz quad-core processor and 128 MB of RAM, which guarantees support for heavy loads. The maximum theoretical throughput of wireless transmission is 1200 Mbps (300 Mbps - 2.4 GHz and 867 Mbps - 5 GHz). The omnidirectional antenna used, with a gain of 2.5 dBi, ensures wide wireless coverage. The device has two Gigabit Ethernet ports and dual-chain 2.4 GHz and 5 GHz wireless networking for dual simultaneous AP coverage. For ease of use, the wAP ac LTE kit comes with a Micro SIM slot.
MikroTik wAP ac LTE kit (wAPGR-5HacD2HnD | |
Processor | IPQ-4018 |
Number of processor cores | 4 |
Processor clocking | 448 - 896 MHz |
Processor architecture | ARM 32bit |
RAM | 128 MB |
RAM type | DDR3L |
Built-in memory | 16 MB Flash |
Number of 1G Ethernet ports | 2 |
Number of miniPCIe slots | 1 (there is an LTE modem in it). |
Wi-Fi radio modem | IPQ-4018 |
Wi-Fi properties | Wi-Fi 5 2.4 GHz: IEEE 802.11 b/g/n 2x2 MIMO (dual-chain) 5 GHz: IEEE 802.11 a/n/ac 2x2 MIMO (dual-chain) |
Energy gain of Wi-Fi antennas | 2.5 dBi |
Energy gain of LTE antennas | 4 dBi |
LTE category | 4 (150 Mbps download, 50 Mbps upload). |
LTE modem | EC200A-EU |
TAC | 86314105 |
LTE FDD Bands | 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 7 (2600MHz) / 8 (900MHz) / 20 (800MHz) / 28 (700MHz). |
LTE TDD bands | 38 (2600MHz) / 40 (2300MHz) / 41 (2500MHz) |
3G category | R7 (21 Mbps download, 5.76 Mbps upload). |
3G bands | 1 (2100MHz) / 5 (850MHz) / 8 (900MHz) |
Category 2G | Class12 |
2G bands | 3 (1800MHz) / 8 (900MHz). |
Dimensions | 185 x 85 x 30 mm |
Operating system | RouterOS v7 Level 4 license |
Permissible operating temperature | From -30 to 60 degrees C. |
Power properties | |
Number of power inputs | 2 (PoE, DC outlet) |
PoE voltage range | 18 - 57 V DC |
DC socket voltage range | 10 - 57 V DC |
Max. current at min. voltage | 0,662 A |
Max. current at max. voltage | 0,21 A |
Nominal voltage of the power supply | 24 V |
Nominal current of the power supply | 0,8 A |
PoE standards | 802.3 af/at |
Maximum power consumption | 12 W |