EN
The MA5608T is the world's first OLT terminal to combine the functionality of an aggregation switch and edge router. Thanks to the use of GPON, 10GPON, Ethernet P2P and triple technology, the terminal provides access to high throughput networks. It is the smallest OLT from Huawei capable of serving up to 4096 users at a time. The device supports up to 32 GPON ports, up to 16 XG-GPON ports, up to 512,000 MAC boards, 8192 ARP board, switching speed up to 720 GB/s. The device is suitable for rack 19 mounting.
OLT supports aggregation management and plug-and-play for remote sites. This eliminates the need to run software on site and integrate the OSS system, which simplifies device management. The management of remote devices focuses on OLT through GE aggregation. In this way, service configuration, software updates and maintenance of remote sites can be carried out via OLT, which significantly reduces the complexity of FTTx network management.
Features / filters | |
PON standard | GPON |
Cards included | GPFD C+, MCUD1 (10GE), MPWD (AC/DC) |
OLT - Number of PON ports | 16 |
OLT - Number of Uplink ports | 8 |
Type of case | Rack (2U) |
Mounting bus switching capability | 720 Gbit / s |
Packet transfer rate of the L2 system | MCUD / MCUD1: 190 Mb / s (active / standby mode), 380 Mb / s (load sharing mode) |
Control panel switching capability | MCUD / MCUD1: 128 Gbit / s (active / standby mode), 256 Gbit / s (load sharing mode) |
Delay in switching / transmitting | A short delay in transmission: The 100 Mbit/s Ethernet port sends 64-byte Ethernet packets with a delay of less than 20 μs. |
Service port | Number of Ethernet ports 10 Mbit / s / 100 Mbit / s: 1 |
Monitoring port | Number of serial ports for environmental monitoring: 1 |
Outband management Ethernet port (RJ-45) | MCUD / MCUD1 |
GPON port | GPBD / GPBH: 8 port ports GPFD: 16 ports |
GPON 10G port | XGBC: 4-port board XGBD: 8 ports |
P2P GE optical port | OPGD / OPGE: unidirectional bi-directional: 48 port board, bi-directional bi-directional: 24 port board |
P2P FE optical port | OPGD / OPGE: unidirectional bi-directional: 48 port board, bi-directional bi-directional: 24 port board |
Ethernet optical port | ETHB: 8 ports |
Port E1 | H802EDTB: 16 ports |
Power mode | DC or AC |
Rated voltage | DC power supply: -48 V / -60 V AC power supply: 110 V / 220 V. |
Working environment temperature | From -40 ° C to + 65 ° C |