Fibaro FGS-223 ZW5 | Double switch | wall mounted
CODE: FGS-223 ZW5 / EAN: 5902020528661
Contact
Account
Favorite
Cart
FIBARO Double Switch 2 is a key element for managing smart house mounted wherever intelligent control of electrical devices is needed. The module allows to turn on and to turn off any devices, lighting or electricity in sockets. The power metering function provides precise information about energy consumption. Its name "Double Switch 2" indicates that it can be used for two electrical devices in the Z-Wave network.
Double electrical switch 2 allows manual control from application. Select and control the device at any time, wherever you are. The power consumption of electrical devices connected to the modules is constantly monitored. Home Center in the Z-Wave network enables extended possibilities of analysis and presentation of charts of energy consumption. Have full control over the power consumption and plan the schedule of operation of home appliances in the Fibaro System.
FIBARO Double Switch 2 can be linked to the data of other devices in the FIBARO system to create automatic actions. Use the modules to control the heating or lighting, and in emergency situations will automatically cut off the current in case of flooding or fire detection. Save energy by switching off the equipment in standby mode with Double Switch 2 and those you do not need.
| Technical Specification | |
| Power supply | 100-240 V~ 50/60 Hz |
| Rated current | IEC standards: 6.5 A per channel, 10 A total UL standards (resistive loads): 6 A per channel, 9.5 A total UL standards (incandescent loads): 3 A per channel |
| Operating temperature | 0° to 35°C |
| Radio protocol | Z-Wave (500 series chip) |
| For mounting in boxes | Ø ≥ 50 mm, depth ≥ 60 mm |
| Radio signal strength | Up to 1 mW |
| Radio transmitter power | Up to 6 dBm (EIRP) |
| Reach | Up to 50 m outdoors Up to 40 m indoors (depending on the terrain and structure of the building) |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
| Dimensions (L x W x H) | 42.5 x 38.25 x 20.3 mm |
| Radio frequency | 868.4, 869.8 MHz EU 908.4, 908.42, 916.0 MHz US 921.4, 919.8 MHz ANZ 869.0 MHz RU |
FIBARO Double Switch 2 is a wireless module designed for use in a wall box or in places where it is required to control up to two electrical devices.
No, you don't need a wall switch. You can control the connected light source through the FIBARO Home Center or configure the FIBARO Motion Sensor to activate the lights when motion is detected.
Single Switch 2 controls one electrical device and Double Switch 2 can control two devices.
FIBARO Double Switch 2 cannot directly control the output. The module simply closes two electrical circuits, so devices connected to the mains switch on or off.
Connect these terminals to the switch. S1 is designed to control output Q1 and S2 to control output Q2.
