Cisco SG110D-08HP | PoE Switch | 8x 1000Mb/s, 4x PoE 802.3af, Desktop
![](https://www.batna24.com/img2/1000/327587_1.webp?20989284238)
EN
The SG110D-08HP model is an eight-port switch with a maximum throughput of 1000 Mb/s per port. The switch belongs to series 110 Cisco Small Business and is designed for use in homes or small offices. The model is additionally equipped with 4 RJ45 ports, which support power transmission via Ethernet cable compliant with PoE 802.3af standard. The total power to be supplied via PoE is 32 W. The switch does not require configuration and is ready to use after taking it out of the package. The device is equipped with many automatic technologies, including built-in QoS (Quality of Service) functions, which automatically give higher priority to video and audio data.
The switch is designed to reduce energy consumption, offering low power consumption without loss of efficiency. Fanless design makes the unit run quietly, discreetly. Each port of the switch independently sets the optimum speed and automatically selects the half-duplex or full-duplex operation.
Increase the speed and efficiency of your office network at low cost and without wasting time on set-up. With Cisco switches you can easily build a highly reliable network to connect computers, printers, copiers and other office equipment. An efficient and reliable business-class office network that simply works right out of the box with the unmanaged Cisco® 110 switches.
The 110 series Switches Cisco enable basic network connectivity for small businesses, providing all the features and expandability. These switches provide the reliability you expect from Cisco. They work immediately, without installation software, without the need for configuration. Simply connect the switch and your computers or other business equipment and get down to work.
The Cisco 110 series is part of Cisco Small Business network solutions. It is a line of unmanageable switches providing Fast Ethernet and Gigabit Ethernet (SG series) connectivity. There are models available for desktop or rack-mounting. The devices are designed to meet basic network needs and optimize energy efficiency. They use less energy, providing the robust, failure-free connectivity required by businesses. The 110 series switches are a business-class network solution at an affordable price. They confirm the reliability that characterizes Cisco products.
● Ease of use - the switches work right out of the box, without having to install software and configure. Each switch port is independently set to the optimal speed and automatically decides whether to work in half-duplex or full-duplex mode. Cisco switches are designed to support 10 Mb/s, 100 Mb/s and up to 1 Gb/s (SG series) devices on the same network. They automatically detect the type of network cable used, so you should not worry about using the wrong one. They are compatible with network devices from other manufacturers.
● Easy installation - Designed for small office spaces, the Cisco 110 series switches are available in both compact wall-mounted and rack-mounted desktop enclosures.
● High Performance - Cisco products feature performance that is essential for business applications such as video services that require high bandwidth and no network latency. The devices support Gigabit Ethernet (SG Series) speed, unlocking new levels of bandwidth and performance on the business network and enabling large file transfers in seconds.
● Reduced energy consumption - the 110 series switches are designed to save energy by optimizing energy consumption without sacrificing efficiency. They support the Energy Efficient Ethernet standard (IEEE 802.3az), which reduces energy consumption by monitoring traffic on the active link and putting the link to sleep mode when not in use. Most switches do not have fans, which results in their silent operation and further reduces energy costs.
● High-tech support - each switch is equipped with advanced motion control features to ensure maximum performance. The integrated QoS intelligence on all models automatically prioritizes delay-sensitive services such as voice or video services to increase network performance. By detecting unintentionally created loops, you avoid collisions of devices that could cause a network to stop. Cable diagnostics allows quick identification and resolution of network cabling problems. Fast store-and-forward switching identifies damaged packets and prevents them from passing through the network. All these functions work automatically, without the need for management or configuration.
● Faultlessness - high quality workmanship and reliability are the features you should expect from Cisco devices. The equipment has been rigorously tested to meet customer expectations and guarantee optimal uptime and performance. The product has a limited lifetime warranty.
Power over Ethernet (PoE) - The 110 Series offers models with PoE ports for both Fast Ethernet and Gigabit Ethernet devices. This feature simplifies the deployment of IP telephony, wireless systems, and video surveillance, allowing network endpoints to be connected and powered via a single Ethernet cable. There is also no need to install separate power supplies for network devices, so advanced communication technologies can be deployed faster and cheaper.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 8x [10/100/1000M (RJ45)] |
Number of PoE ports | 4x [802.3af/at (1G)] |
Number of WAN ports | Not applicable |
10G support | No |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Built-in modem | None |
Certification | UL (UL 60950), CSA (CSA 22.2), CE, FCC 15 (CFR 47) A, FCC B |
Copper ethernet cabling technology | 1000BASE-T,100BASE-TX,10BASE-T |
DC input voltage | 48 |
Depth | 129 |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Forwarding rate | 11.9 |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 8 |
Harmonized System (HS) code | 85176990 |
Head-of-line (HOL) blocking | Yes |
Height | 30 |
Input current | 1.25 |
Input voltage | 48 |
Jumbo frames | 9216 |
Jumbo frames support | Yes |
LED indicators | Yes |
Management | No |
Networking standards | IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x |
Number of queues | 4 |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Power (W) | 32 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 4 |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Quick start guide | Yes |
Rack mounting | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -20 - 70 |
Switch layer | L2 |
Switch type | Unmanaged |
Switching capacity | 16 |
Switching layer | 2 |
Type of case | Desktop |
Web-based management | No |
Weight | 510 |
Width | 160 |
Basic technical parameters | |
Cabling | Category 5e or higher |
Supported standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, 802.3af, Power over Ethernet |
LED lights | System/PWR, link/activity, 100M,*PoE, *mMax PoE, cable diagnostics, loop detection, *gigabit, *mini-GBIC (*if the switch is equipped with this port) |
Physical interfaces | |
Ports | 8 ports RJ-45 10BASE-T/100BASE-TX/1000BASE-T |
Power supply | DC 48 V, 1.25 A |
Socket | Kensington Castle Nest |
Physical dimensions (W x D x H) | 160 mm x 30 mm x 128.5 mm |
Weight | 0.55 kg |
Power over Ethernet (PoE) | 4 Gigabit PoE ports with 802.3af support, PoE power 32 W |
Fan | None |
Performance | |
Switching capacity | 16 Gb/s |
Capacity | 11.9 mpps (based on 64-byte packages) |
Functions | |
Head-of-line (HOL) | Prevention of HOL blocking |
Jumbo frame | 9216 bytes |
Quality of service (QoS) | 802.1p, 4 queues, priority and CSF |
Loop detection | Helps to detect loops in the network |
Cable diagnostics | Quick identification and troubleshooting of network cables and/or short circuits |
Installation and protection | |
Mounting options | Desktop |
Physical security lock | Kensington Castle Nest |
Environmental features | |
Certificates of conformity | UL (UL 60950), CSA (CSA 22.2), CE, FCC Part 15 (CFR 47) Class A, FCC Class B* (*selected models) |
Operating temperature | 0°C to 40°C (32°F to 104°F) |
Storage temperature | -20°C to 70°C (-4°F to 158°F) |
Ambient humidity | 10% to 90%, relative, non-condensing |
Humidity during storage | 5% to 90%, relative, non-condensing |
System memory | 128-MB RAM 128-MB Flash |
Package contents | Cisco Switch 110 series Power cable/mains adapter Operating instructions Mounting accessories |