Cisco Business 145AC | Access Point | 802.11ac 2x2 Wave 2 Wall Plate
![](https://www.batna24.com/img2/1000/328945_1.webp?20989284238)
EN
The Cisco® Business 145AC access point is a compact, wall-mounted access point, ideal for use in rooms or offices requiring connectivity to both wired and wireless devices. With support for the 802.11ac Wave 2 wireless standard and Gigabit Ethernet connectivity in an elegant device. This combination provides deployment flexibility and best-in-class performance.
Thanks to the 802.11ac Wave 2 standard, the Cisco Business 145AC access point provides a data transfer rate of up to 867 Mb/s on the radio frequency 5 GHz. This exceeds the capabilities offered by access points supporting 802.11n standard. It also allows for a total, two-radio data transmission speed up to 1 Gb/s. In recent years, both small companies, enterprises and service providers increasingly prefer wireless access as the basic form of network communication. With this change, it is expected that wireless connectivity should enable high performance. The Cisco Business 145AC Access Point provides industry-leading performance and highly secure and reliable wireless connections.
Multi-User Multiple-Input Multiple-Output (MU-MIMO) technology allows simultaneous data transmission to multiple 802.11ac Wave 2 clients to improve customer service. Before the introduction of MU-MIMO technology, 802.11n and 802.11ac Wave 1 access points could only transmit data to one client at a time. This was usually referred to as MIMO for a single user (SU-MIMO).
The device has three Gigabit Ethernet ports for secure connection of wired devices to the network. One of these Ethernet ports can also provide power to devices such as an IP phone or IP camera, using Power over Ethernet (PoE).
Cisco Business Mobile allows for easy implementation and configuration of multiple Cisco Business access points and Mesh devices without a physical controller. Optional remote management of multiple access points is available via Cisco FindIT Network Management application.
It is possible to mix Cisco Business Mesh and access points to increase the range of WiFi networks.
The Cisco Business 145AC access point supports the latest 802.11ac Wave 2 standard, providing higher performance, greater network coverage. With simultaneous support for two bands with 802.11ac Wave 2 MU-MIMO, this access point can support more devices and high-bandwidth applications.
The Cisco Business 140AC access point is managed through Cisco Business Mobile, an intuitive mobile application that simplifies traditional wireless deployment challenges directly from the smartphone. You can easily expand your network by adding new Mesh extensions using Quick Response (QR) codes and activating your wireless network in minutes. The powerful management function dynamically changes the network configuration, e.g. allowing secure guest access. Network usage, traffic patterns and bandwidth can be closely monitored, providing real-time data; this not only provides peace of mind, but virtually ensures optimal service. The Cisco Business Mobile application is available for iPhone, iPad and Android devices.
The Cisco Business 145AC access point provides wired access via Gigabit Ethernet ports. The 145AC Access Point is equipped with three Gigabit Ethernet ports, including one Gigabit Ethernet Uplink and one passive RJ45 pass-through port, allowing for different connections.
This compact access point is designed for flexible mounting possibilities. It can be mounted directly on the wall. It is easy to install and the mounting hardware is included.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Maximum wireless transmission speed | 1200 Mb/s |
Number of LAN ports | 4x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11ac Wave 2, IEEE 802.11n, |
Antenna gain | Under 10dbi |
Antenna type | Integrated |
Application | Indoor |
MIMO Type | MU-MIMO 2x2 |
Numbers of pieces in the package | 1-pack |
Type of device power supply | PoE 802.3af/at |
Technical Specification | |
Authentication and security | Wi-Fi Protected Access 2 and 3 (WPA2 and WPA3) 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA) ● 802.11r and 802.11i |
Maximum number of clients | Maximum number of related wireless clients: 200 per one Wi-Fi radio, total of 400 clients per access point |
Maximum number of Mesh Extender devices | ● 25 per access point, up to 8 hops |
802.11ac | MIMO 2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps at 5GHz. Channels 20, 40 and 80-MHz Dynamic frequency selection (DFS) |
Supported data rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mb/s 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mb/s 802.11n 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40) 802.11ac 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9) |
Transmission power settings available | 2.4 GHz: up to 20 dBm 5 GHz: up to 20 dBm |
Integrated antennas | 2.4 GHz, 2 dBi gain 5 GHz, 3 dBi gain |
Interfaces | 1x Gigabit Ethernet uplink (automatic 10/100/1000BASE-T detection), PoE 3x local Gigabit Ethernet ports (10/100/1000BASE-T), including one port with PoE output. One passive pass-through port, RJ45 pass-through |
LEDs | The status LED indicates the status of the start-up program, connection status, operating status, warnings for the start-up program, start-up program errors. |
Dimensions (W x L x H) | ● 89 x 140 x 31.5 mm |
Weight | Access point without mounting bracket and other accessories: 280 g |
Environmental | Action: Temperature: 32° to 104°F (0° to 50°C) Humidity: 10% to 90% (non-condensing) Maximum height: 9843 feet (3000 m) at 40°C Warehousing and transportation: Temperature: -22° to 158°F (-30° to 70°C) Humidity: 10% to 90% (non-condensing) Maximum height: 15 000 feet (4500 m) at 25°C |
System resources | 1 GB DRAM, 256 MB flash 710-MHz quad-core processor |
Power options | 802.3af/at Ethernet switch; Cisco Business switch with PoE is recommended Optional PoE Injector Cisco Business |
Power consumption | ● 8.5W |
Physical security | ● Torx security screw, supplied with the access point ● Kensington lock socket for locking the device to the mounting bracket |
Installation | The handle is attached to the access point |
Guarantee | Cisco Business Limited Lifetime Equipment Warranty Free software updates |