EN
Service providers are facing an ever-increasing demand for bandwidth in a limited amount of spectrum. The Force 4600 series of subscriber modules (SM) meets this demand, offering high performance and low latency in both PMP and PTP deployments. The SM Force 4600 series is available in two versions: Force 4600C with connector and Force 4625 with integrated antenna. The Cambium EPMP Force 4625 is compatible with ePMP 4600 access points, which use MU-MIMO technology to achieve more than 4 Gbps per sector. The Cambium EPMP Force 4600C is easy to install, configure and manage using Cambium Networks' cnMaestro™ system.
The Cambium EPMP Force 4625 uses 802.11ax technology, which allows the use of channels up to 160 MHz wide and modulation up to 4096 QAM. This enables the Cambium EPMP Force 4625 to achieve performance of up to 2 Gbps in PTP mode and up to 1 Gbps in PMP mode. The Cambium EPMP Force 4625 also uses ePTP technology, which reduces latency to less than 5 ms and increases spectral efficiency.
The Cambium EPMP Force 4625 is compatible with ePMP 4600 access points, which use MU-MIMO technology to simultaneously transmit up to two ePMP 4600 subscriber modules. This enables ePMP 4600 access points to achieve throughput of more than 4 Gbps per sector to support more users and applications with high bandwidth requirements.
The Cambium EPMP Force 4625 is easy to install and configure with an intuitive user interface and tools such as LINKPlanner and cnHeat to help with network planning and coverage optimization. The Cambium EPMP Force 4625 is also easy to manage with Cambium Networks' cnMaestro™, which enables remote monitoring, updates, reports and alerts for the entire network.
The Cambium EPMP Force 4625 is a subscriber module (SM) for broadband wireless point-to-point (PTP) and point-to-multipoint (PMP) applications in the 6 GHz band. The Cambium EPMP Force 4625 provides high capacity, low latency and high reliability data transmission in congested and limited spectrum. The Cambium EPMP Force 4625 is compatible with ePMP 4600 access points, which use MU-MIMO technology to achieve more than 4 Gbps per sector. The Cambium EPMP Force 4625 is easy to install, configure and manage using Cambium Networks' cnMaestro™ system.
Spectrum | |
Channel width | 20 | 40 | 80 | 160 MHz |
Proprietary physical layer | ePMP radio interface with 2x2 MIMO/OFDMA |
Channel spacing | Configurable in 5 MHz increments |
Frequency range | 5725 - 7125 MHz |
Interfaces | RJ45 100/1000 BaseT, Auto-negotiation, Compatible with 802.3at |
Protocols | IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
Management | HTTP/HTTPS, SNMPv1/2, SNMPv3, SSH |
VLAN | 802.1Q with 802.1p priority |
Physical parameters | |
Degree of tightness | IP55 |
Operating temperature | -30°C to 55°C (-22°F to 131°F) |
Weight | 2.76 kg |
Dimensions | 472 x 472 x 296 mm (18.5 x 18.5 x 11.7 in) |
Range of mast diameter | 3.1 to 7.6 cm |
Energy consumption | 13W (Up to 15W in extremely low temperatures when the heater is on) |
Input voltage | 44V - 59V |
Antenna | Integrated 25 dBi dish antenna |
Security | |
Encryption | 128-bit AES (CCMP mode), 256-bit AES optional where allowed |