Cambium EPMP Force 300-25L SM EU | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi, EU cord
CODE: C050910M273A
EN
High-performance subscriber modules for point-to-point and point-to-multipoint fixed wireless broadband applications. Features up to 400 Mbps throughput using the proven ePMP platform in 802.11ac models (200 Mbps in 802.11n models) Compatible with all ePMP access points, including ePMP 3000 and ePMP 3000L.
Service providers face an ever-increasing demand for capacity with limited spectrum. The ePMP Force L series of subscriber modules (SMs) meets this demand by offering high high performance, scalability, low latency in both point-to-point and point-to-multipoint deployments, while providing a rapid return on investment.
Technical data | |
Channel width (MHz) | 20 | 40 | 80 |
Reserved (Physical layer) | 2x2 MIMO/OFDM |
Channel (Channel spacing) | Configurable in 5 MHz increments |
Frequency range | Wide band operation 4910-6200 MHz |
Ethernet interface | 10/100/1000 BaseT, Compatible with Cambium PoE and PoE pinout standard |
Protocols used | IPv4, IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH |
Network, Network Management | IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks cnMaestro |
VLAN | 802.1Q with 802.1p priority |
Performance | |
ARQ | Yes |
Nominal Receive Sensitivity, Sensitivity (w/FEC) @20 MHz Channel | MCS0 = -89 dBm; MCS9 = -62 dBm |
Nominal Receive Sensitivity, Sensitivity (w/FEC) @40 MHz Channel | MCS0 = -86 dBm; MCS9 = -60dBm |
Nominal receive sensitivity, Sensitivity (w/FEC) @80 MHz Channel | MCS0 = -84 dBm MCS9 = -57 dBm |
Modulation levels (Adaptive) | MCS0 (BPSK) MCS9 (256 QAM 5/6) |
Transmission power, range | 3 to 24 dBm (total, up to regional EIRP limit) (1 dB spacing) |
QoS (Quality of Service) | Three priority levels (voice, high, low) with packet classification by DSCP, COS, VLAN ID, IP and MAC address, Broadcast, Multicast and Station Priority. |
Physical Data | |
Surge suppression | 1 joule integrated |
Environment | IP55 |
Temperature | -30°C to 60°C (-22°F to 140°F |
Weight | 1.6 kg |
Survival against the wind | 200 km/h (124 mph) |
Dimensions | 280 x 470 x 470 mm |
Pole diameter - range | 2.5 - 7.5 cm |
Power consumption | 12 W max, 9 W typical |
Input voltage | 30 V Passive PoE (14-30 V DC input) |
Security | |
Encryption | 128-bit AES (CCMP mode) |
Certificates | |
FCC | Yes |
CE | Yes |
Antenna specifications | |
Frequency range | 4,920 - 6,400 MHz |
Antenna type | Integrated plate |
Peak gain | 25 dBi |
3 dB beamwidth (azimuth) | 6º to 10º |
3 dB beamwidth (Facade) | 6º to 10º |