EN
Thanks to its high performance the intelligent Aqara vibration sensor is the perfect solution for internal monitoring. The device is equipped with intelligent sensitivity and high quality material, so that the sensor can be placed anywhere according to your needs (e.g. valuable images, drawers and cabinets, balcony doors), while ensuring full security. The vibration sensor is adapted to work with other electrical devices and can be remotely controlled by telephone at any time and anywhere.
When the slightest vibration, tilt or fall is detected, the Aqara vibration sensor will activate the Aqara HUB to issue an alarm and send a notification to your phone. The vibration sensor will work with other accessories with HomeKit support at home.
The Aqara vibration sensor is embedded in the acceleration sensor (Accelerometer) with extremely high precision. Thanks to the UV-resistant material used, the color does not fade, which will allow for long-term use. The sensor consumes little energy and one battery lasts about 2 years.
Features / filters | |
Batteries included | Yes |
Battery voltage | 3.3 |
Compatible battery sizes | CR2032 |
Connectivity technology | Wireless |
Depth | 9 |
Height | 36 |
Manual | Yes |
Material | Acrylonitrile butadiene styrene (ABS) |
Mounting type | Ceiling/wall |
Number of batteries supported | 1 |
Operating relative humidity (H-H) | 0 - 95 |
Operating temperature (T-T) | -10 - 45 |
Placement | Indoor |
Power source type | Battery |
Product colour | White |
Quantity | 1 |
Width | 36 |
Technical data: | |
Dimensions | 36 x 36 x 9 mm |
Battery | CR2032 |
Operating temperature | -10 ℃ - + 45 ° C |
Operating humidity | 0 - 95% RH, non-condensing |
Application | Apple Home (iOS 10.3 or later), Aqara Home application (Android 5.0 or higher, iOS 10.3 or higher) |
Wireless protocol | Zigbee |
Quick Start Guide (ENG) | Download |
No, the Aqara vibration sensor must work with Aqara HUB. When vibration is detected, the device will activate an audible and light alarm. An alarm notification will be sent to the phone.
The Aqara vibration sensor uses a CR2032 button battery. When changing the battery, insert a coin into the slot in the battery cover and turn it counterclockwise to release the cover. Remove the old battery and insert a new CR2032 Button Battery and tighten the battery cover.