ZTE ZXHN F673A | ONT | WiFi, 1x GPON, 4x RJ45 1000Mb/s, 1x RJ11, 2x USB
About product
ZTE F673A - GPON ONT terminal
The F673A terminal is a high-end gateway to FTTH solutions. Access to broadband Internet is provided by using GPON technology.
Wireless interface
Connecting to the network in ZTE F673A is even easier with Wi-Fi which the terminal provides. This will allow wireless access without the need for additional cables.
Additional connectors
F673A will allow you to make phone calls because it has a POTS RJ-11 connector, while up to 2 USB connectors will allow you to connect devices such as a data carrier to back up your settings or share files on the network.
Fast and stable network operation
Apart from Wi-Fi the F673A terminal has 4 Ethernet interfaces in the Gigabit Ethernet standard. With their use it will be possible to connect devices by cable and provide a fast, stable connection to the network.
Specification
Specification
WAN Port
1 x GPON port
Class B+
The sensitivity of the receiver: -27 dBm
Wave length:
-Transmission: 1310 nm
-Reception: 1490 nm
WBF (Wavelength Blocking Filter)
Compliance with SN, or password verification (G.984.3)
Two-way FEC
SR-DBA and NSR-DBA
LAN ports
4 x Gigabit Ethernet port (RJ-45)
VLAN tags and their removal based on Ethernet ports
1:1 VLAN, N:1 VLAN, transparent VLAN transmission
QinQ VLAN
Limit on the number of known MAC addresses
MAC address recognition
Transparent transmission of IPv6 packets in Layer 2 (L2)
Phone port
1 x POTS port (RJ-11)
Minimum REN: 4
Decoding/Encoding G.711/μ, G.729a/b, G.722
Fax mode T.30/T.38/G.711
DTMF
Emergency calls (SIP protocol)
USB ports
2 x USB 2.0
FTP-based file sharing on the network
WLAN
IEEE 802.11 b/g/n
2 x 2 MIMO
Antenna gain: 2 dBi
WMM
Many SSIDs
WPS
Smart services
Wi-Fi Smart sharing:
-Verification Portal/802.1x
-Share based on SoftGRE
Link one account to 2 POTS ports
Smart correlation
Smart Wi-Fi coverage zone
Automatic negotiation SIP/H.248
Any port - any service
Parental control
L2/L3 redirection (IPv4):
-Submission: 1 G
-Drawing: 2 G
Features of layer 3
PPPoE / Static IP / DHCP
NAT / NAPT
Port forwarding
ALG, UPnP
DDNS server, DNS server/client
Dual stack IPv6 / IPv4, DS-Lite
Static / Default routes
Multiple services on one WAN port
QoS
Ethernet capacity limit
Priority 802.1p
SP / WRR / SP+WRR
Limit on the size of the broadcast packets
Flow mapping based on VLAN ID, port ID and/or 802.1p
Safeguards
Firewall SPI
Filtering based on MAC address / IP / URL
Saving energy
Energy-saving mode indicator
Reduction of power consumption when components are idle in power-saving mode
COCv4
Dynamic saving
Wi-Fi shutdown schedule
Smart O&M
Variable message length OMCI
Active/passive detection of incorrect ONT and isolation
Simulation testing of PPPoE / DHCP
Emulation of telephone calls, Circuit test, Loop test
Joint O&M
IGMP v2/v3 snooping
MLD v1/v2 snooping
Quick exit
Translation of VLAN labels, Transparent transmission, Deleting multicast packets on download
Packet size limit for IGMP / MLD protocols
Dimensions
220 x 160 x 32 mm
Weight
Less than 1 kg
Working conditions
Temperature: 0°C to 40°C
Humidity: 2% to 95% (non-condensing)
Power supply
Input: 100-240 V AC, 50/60 Hz
Output: 11-14 V DC, 0.5 A
Power consumption
7.5W
Maximum power consumption
18W
Ports
4 x Gigabit Ethernet port
2 x POTS telephone port
1 x GPON port
2 x USB port
LED indicators
POWER / PON / FATE / LAN / TEL / USB / WLAN / WPS
FAQ
Pytanie: What is Gigabit Ethernet on ZTE F673A?
The ZTE F673A terminal has 4 connectors with Gigabit Ethernet support. Each Gigabit Ethernet port allows for data transfer at a speed of 1 Gb/s.
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen

ZTE ZXHN F673A | ONT | WiFi, 1x GPON, 4x RJ45 1000Mb/s, 1x RJ11, 2x USB