Ubiquiti U-PRO-MP | Mounting bracket | dedicated for UniFi devices
KOD: U-PRO-MP
EAN: 0817882023658
EAN: 0817882023658
About product
Professional UniFi mounting system
Versatile mounting system for UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD. Using the mounting plate and brackets, you can mount a UniFi AP access point on a wall, ceiling or junction box.
FAQ
Pytanie: How to install the equipment on the wall?
1. Put the mounting plate on a desired spot on a wall with the arrow pointing upwards.
2. Mark four A-marked holes and use a 8mm drill to make the holes. If the Ethernet cable goes out of the wall then drill or cut out a hole about 18 mm in diameter and then put a CAT5/6 cable trough it.
3. Insert the wall plugs and screw the mounting plate to the wall.
4. Connect the Ethernet cable. 5. Adjust the arrow on the top of the UniFi AP to match the arrow on the mounting plate.
6. Turn the UniFi AP clockwise until the latches are secured.
2. Mark four A-marked holes and use a 8mm drill to make the holes. If the Ethernet cable goes out of the wall then drill or cut out a hole about 18 mm in diameter and then put a CAT5/6 cable trough it.
3. Insert the wall plugs and screw the mounting plate to the wall.
4. Connect the Ethernet cable. 5. Adjust the arrow on the top of the UniFi AP to match the arrow on the mounting plate.
6. Turn the UniFi AP clockwise until the latches are secured.
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
Ubiquiti U-PRO-MP | Mounting bracket | dedicated for UniFi devices
