![Ubiquiti UF-LOCO-20 | ONT | UFiber, 1x GPON, 1x RJ45 1000Mb/s, 20-pack Ilość portów LAN1x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/327407_1.webp?20989284230)
Thanks to the elegant U Fiber loco design, it is a rugged, high-performance GPON CPE device, which is characterized by exceptionally low power consumption and two power options. With easy-to-read LEDs provide information about the status of: Ethernet connection, signal strength and power.
The UFiber loco can be powered by a Micro-USB power supply (supplied) or 24 V passive PoE.
You can connect up to 128 devices to one GPON port. Supporting GPON links of up to 20 km, UFiber loco integrates with UFiber OLT, UFiber OLT 4 and other OLT devices.
| Features / filters | |
| Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
| PON standard | GPON |
| Certification | CE, FCC, IC |
| Data transfer rate | 2.488 |
| Depth | 76.5 |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN data rates | 10,100,1000 |
| Harmonized System (HS) code | 85176990 |
| Height | 26.4 |
| Input current | 1 |
| Input voltage | 24 |
| LED indicators | Network, Power, Signal strength |
| Memory and processor | MIPS32 |
| Number of processors installed | 1 |
| Numbers of pieces in the package | 20-pack |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | -10 - 45 |
| Power consumption (typical) | 3.5 |
| Power LED | Yes |
| Power over Ethernet (PoE) | Yes |
| Processor frequency | 240 |
| Product colour | Black, Grey |
| Reset button | Yes |
| Weight | 77 |
| Width | 76.5 |
| Basic technical parameters | |
| Dimensions | 76,5 × 76,5 × 76,5 × 26,4 mm |
| Weight | 77 g |
| Network Interfaces | (1) SC/APC, GPON WAN (1) RJ45, Ethernet LAN |
| Speed network interface | (1) GPON WAN, ITU G.984, 2.488 Gbps download, 1.244 Gbps upload (1) GbE LAN, 10/100/1000 Mbps |
| Management interface | Ethernet in the band PON |
| Normal optical power range | TX (B+ class): 1.5-5 dBm. RX: -28 to -8 dBm |
| Power supply method | Micro-USB: 5 V, 1A 24 V PoE passive (pins +4, 5; -7, 8) |
| Power supply | Micro-USB Adapter: 5 V, 1A |
| Maximum electricity consumption | 3,5W |
| Range of supported voltages | 4.7 to 5.3 V |
| CPU specification | MIPS-32, 240 MHz |
| Memory | 128 MB DDR3 |
| Button | (1) Reset |
| Operating temperature | -10 to 45° C |
| Working humidity | 10 to 90% |
Connect the optical fiber from the passive optical network to the PON port.
1. Podłącz kabel Ethernet do portu LAN.
2. Jeśli używasz zasilacza Micro-USB, podłącz drugi koniec kabla Ethernet do sieci LAN.
Operating temperature: -10 to 45° C
