Ubiquiti LOCO5AC-5 | CPE | NanoStation 5AC loco, 5GHz, 1x RJ45 1000Mb/s, 13dBi, 5-Pack
KOD: LOCO5AC-5
EAN: 0817882027267
EAN: 0817882027267
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
Wireless network standards: IEEE 802.11ac
5 GHz: Yes
AC input voltage: 24
About product
Elegant device
NanoStation AC loco is another evolution of the iconic CPE design that revolutionized the wireless ISP industry.Management via Wi-Fi
Each model includes a separate Wi-Fi radio, which enables quick and easy configuration using a mobile device.
Improved ESD protection
NanoStations offer enhanced protection against electrostatic discharges.
Now with airOS
airOS 8 software offers advanced features including airMAX ac protocol operation, real-time signal analysis and a completely new design for increased usability.Specification
Features / filters
LAN standard
Number of LAN ports
Operating frequency
Wireless network standards
5 GHz
AC input voltage
Antenna features
Antenna gain
Antenna gain level (max)
Antenna type
Built-in processor
Certification
CPU frequency
Device type
Ethernet LAN (RJ-45) ports
Ethernet LAN data rates
Frequency band
Horizontal beamwidth
Housing material
Input current
Internal memory
LED indicators
Maximum data transfer rate
Maximum outdoor range
MIMO
Modulation
Mounting kit
Number of products included
Numbers of pieces in the package
Operating relative humidity (H-H)
Operating system installed
Operating temperature (T-T)
Placement
Polarization
Power consumption (max)
Power over Ethernet (PoE)
Processor architecture
Processor frequency
Processor model
Product colour
Quality of Service (QoS) support
RAM memory
Reset button
Security algorithms
Type of device power supply
Web-based management
Specification
Dimensions
179 × 77,5 × 59,1 mm
Weight
180 g
Processor
MIPS 74K
DDR2 memory
64 MB
Antenna gaih
13 dBi
Network interface
10/100/1000 Mbps Ethernet port
Power supply method
Passive PoE (pairs 4, 5+; 7, 8 return)
Power supply
24 V, 0.3A Gigabit PoE
Maximum electricity consumption
7W
Range of supported voltage
24 V ±10%
ESD/EMP protection
±24kV contact / air
Operating temperature
-40 to 70° C
Working humidity
5 to 95%
FAQ
Pytanie: How to mount the device on a pole?
1. Put the NanoStation on a pole and insert the cable tie in the mounting hole.
2. Adjust the NanoStation so that it faces the other end of the wireless link then tighten the cable tie around the pole.
3. Connect the Ethernet cable from the NanoStation port to the PoE-enabled port in a switch.
2. Adjust the NanoStation so that it faces the other end of the wireless link then tighten the cable tie around the pole.
3. Connect the Ethernet cable from the NanoStation port to the PoE-enabled port in a switch.
Pytanie: At what temperature can the device work ?
Operating temperature: -40 to 70° C
Pytanie: What is the frequency of operation ?
Operating frequency: 5 GHz
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
Ubiquiti LOCO5AC-5 | CPE | NanoStation 5AC loco, 5GHz, 1x RJ45 1000Mb/s, 13dBi, 5-Pack
