Ubiquiti ES-16-XG | Switch | EdgeMAX EdgeSwitch 12x SFP+, 4x RJ45 10Gb/s, Managed Aggregation Switch
EOL
KOD: ES-16-XG-EU
EAN: 0810354024535
EAN: 0810354024535
LAN standard: 10 Gigabit Ethernet
Number of LAN ports: 12x [10G (SFP+)]
Number of LAN ports: 4x [1/10G (RJ45)]
10G support: Yes
AC input frequency: 50/60
Recommended products
About product
High throughput 10G lines
EdgeSwitch has 12 SFP+ ports and four RJ45 10GBASE-T ports that effectively deliver and aggregate data at 10Gbps.
Powerful switch
EdgeSwitch offers the ability to transfer data to process traffic on all ports simultaneously at line-rate without losing packets. It has a total, non-blocking bandwidth of up to 160 Gbps.
Advanced switch
EdgeSwitch uses a powerful operating system that provides advanced switching functions, including VLAN tagging and link aggregation, and limited Layer 3 functionality, including static routing and DHCP server functionality.
Comprehensive user interface
The EdgeSwitch configuration interface, designed for convenient management, allows administrators to configure and monitor switching functions in a graphical interface. For advanced users, the command line interface (CLI) is available through the console port, telnet and SSH.
Functions:
- MSTP/RSTP/STP
- VLAN, Private VLAN, Voice VLAN
- Link Aggregation
- DHCP Snooping, IGMP Snooping
- TACACS+, RADIUS, 802.1X, MAC Filtering, ACL
- DiffServ, CoS
- Static Routing
- DHCP server functionality
Rack-mountable construction
The metal case and included mounting brackets make it possible to mount the EdgeSwitch in a 19" rack.
Most important features
- Rack-mountable
- 12 SFP ports
- 4 10GBASE-T RJ45 ports
- Metal case
Specification
Features / filters
LAN standard
LAN standard
Number of LAN ports
Number of LAN ports
10G support
AC input frequency
AC input voltage
Access Control List (ACL)
Authentication
Authentication type
Basic switching RJ-45 Ethernet ports quantity
Basic switching RJ-45 Ethernet ports type
Broadcast storm control
Certification
Console port
Copper ethernet cabling technology
DC input voltage
Depth
DHCP features
Ethernet LAN data rates
Flow control support
Form factor
Forwarding rate
Full duplex
Gigabit Ethernet (copper) ports quantity
Half duplex
Harmonized System (HS) code
Height
IGMP snooping
Installed SFP+ modules quantity
Jumbo frames support
LED indicators
Link aggregation
MAC address filtering
MAC address table
Management
Management
Management protocols
Multicast support
Number of queues
Number of VLANs
Operating relative humidity (H-H)
Operating temperature (T-T)
Password protection
Port mirroring
Power consumption (max)
Power over Ethernet (PoE)
Power supply included
Product colour
Quality of Service (QoS) support
Rack mounting
Security algorithms
Spanning tree protocol
Static route
Switch type
Switching capacity
Switching layer
Switching layer
System event log
Type of case
Type of case
Virtual LAN features
VLAN support
Web-based management
Weight
Width
Specification
Dimensions
443 × 221 × 43 mm (17,44 × 8,70 × 1,69")
Weight with mounting brackets
2.71 kg (5.97 lb)
Weight without mounting brackets
2,62 kg (5,78 lb)
Non-blocking throughput
160 Gbps
Maximum power consumption
36W (does not include SFP/SFP+)
Power supply method
AC 100-240VAC/50-60 Hz, universal input
DC 56W, 25 to 16 V, with 2.5 mm
DC Power Inline Connector
Power supply
AC/DC, internal, 56W DC
Voltage range supported
100 to 240VAC
25 to 16VDC
Installation in a rack
Yes, 1U high
Network Interfaces
(12) 1/10 Gbps SFP+ Ethernet
(4) Ethernet ports 1/10 Gbps RJ45
Management interface
(1) RJ45 serial port, In-Band Ethernet
ESD/EMP protection
Air: ± 24 kV, Contact: ± 24 kV
Shocks and vibrations
Standard ETSI300-019-1.4
Operating temperature
-5 to 40° C
Operating humidity
5 to 95%
Certificates
CE, FCC, IC
FAQ
Pytanie: How to connect to the SFP+ port?
1. Remove the protective cap covering the SFP+ port.
2. Connect the appropriate fiber optic module to the SFP+ port.
3. Connect the fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber optic device.
4. Repeat steps 1-3 to connect additional SFP+ ports.
2. Connect the appropriate fiber optic module to the SFP+ port.
3. Connect the fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber optic device.
4. Repeat steps 1-3 to connect additional SFP+ ports.
Pytanie: What is the non-blocking throughput?
Total non-blocking throughput: 160 Gbps
Pytanie: At what temperature can the device work ?
Operating temperature: -5 to 40° C
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsLast seen
Ubiquiti ES-16-XG | Switch | EdgeMAX EdgeSwitch 12x SFP+, 4x RJ45 10Gb/s, Managed Aggregation Switch
