Ubiquiti EP-R8 | Router | EdgeMAX EdgePoint, 6x RJ45 1000Mb/s PoE, 2x RJ45/SFP Combo
KOD: EP-R8-EU
EAN: 0810354021992
EAN: 0810354021992
Number of LAN ports: 2x [1G Combo (RJ45/SFP)]
3G/4G USB modem compatibility: No
Antenna type: Not supported
Built-in processor: Yes
Cabling technology: 10/100/1000Base-T(X)
About product
WISP Intelligent Control Point with FiberProtect
The EdgePoint EP-R8 Gigabit router features FiberProtect, which significantly reduces damage from electrostatic discharge (ESD) and reduces electromagnetic interference (EMI) and significantly improves the data signal quality for long-distance connections.All-In-One device
This single, compact device helps effectively avoid clutter from tangled cables. There is no need to buy expensive racks or pay for maintenance. The EdgePoint enclosure is resistant to harsh weather conditions, including wind, rain and snow. The included cover allows you to additionally protect your cables.Various power options
Powered by 54 V DC or via PoE, the EP-R8 is capable of powering 54 V or 24 V all Ubiquiti devices via PoE, including the airFiber and airMAX series.EP-R8 offers powerful features
- VLAN interfaces for network sharing
- Static routing and support for the OSPF, RIP, and BGP protocols
- Firewall and NAT rules Application identification using Deep Packet Inspection (DPI)
- DHCP Quality of Service (QoS)
- Network administration and monitoring functions
- Administrator and operator accounts
- Full IPv6 support
Intuitive user interface
The EdgePoint Gigabit router provides a graphical interface designed for convenience of use and configuration. Access through your network port and website. Intuitive device management is done through a virtual port view that displays physical connectivity, speed and status.
Configuration via CLI
The CLI provides fast and flexible command line configuration and has a settings managemer and monitors all advanced features. It also includes direct access to standard Linux tools and shell commands and access to CLI via SSH, Telnet..
Specification
Features / filters
Number of LAN ports
Number of LAN ports
3G/4G USB modem compatibility
Antenna type
Built-in processor
Cabling technology
Certification
CPU frequency
Depth
DSL WAN
Ethernet interface type
Ethernet LAN
Ethernet LAN (RJ-45) ports
Ethernet LAN data rates
Ethernet WAN
Height
Internal memory
LED indicators
Management
Management
Networking standards
Number of CPU cores
Operating relative humidity (H-H)
Operating temperature (T-T)
Package depth
Package height
Package weight
Package width
PoE input
PoE output
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity
Processor cores
Processor frequency
Product colour
Quality of Service (QoS) support
RAM memory
Reset button
SIM card slot
Type of case
Type of device power supply
Weight
Width
Specification
Serial Console Port
(1) RJ45 Serial Port
PoE input port
(1) RJ45 Port
Ethernet ports
(6) 10/100/1000 RJ45 Ports
(2) 10/100/1000 RJ45/SFP Combination Ports
Dimensions
326.6 × 382.7 × 88.8 mm (12.86 × 15.07 × 3.50")
Dimensions with wall bracket
326.6 × 382.7 × 105.5 mm (12.86 × 15.07 × 4.15")
Weight
3.4 kg
Max. energy consumption
40W (Without PoE outputs)
Power inputs
(1) DC Terminal Block
or
(2) RJ45 (PoE In and eth0)
Power supply
Min. 54 V / 0.8 A
Input voltage
54 V DC, 6A
PoE entrance
(2) 54 V / 1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) PassivePoE, eth0 and PoE In (PoE In is DC Only, No Data)
PoE output
(2) 54 V or 24 V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8)Passive PoE, eth1 to eth2
(5) 24 V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth3 to eth7
Power monitoring
(1) DC Terminal Block, Input power
(2) RJ45, PoE In and eth0, Input power
Supported voltage range
56 to 42 V DC
Buttons
Reset
Processor
Dual-Core 600 MHz, MIPS64 with hardware accelerated packet processing
Memory RAM
2 GB DDR3-1600 FRAMES
Code Storage
4 GB
Certificates
CE, FCC, IC
Wall/base mounting
Yes
Temperature during operation
-20 to 65° C (-4 to 149° F)
FAQ
Pytanie: How to configure PoE settings
Before activating 54 V or 24 V passive PoE, make sure the connected device supports PoE and has the voltage supplied.
1. Go to Actions > PoE for the interface you want to configure.
2. Configure PoE settings
For eth1-eth2, select Off, 24 V-4pair, or 54 V-4pair
For eth3-eth7, select Off or 24 V
Then click Save.
1. Go to Actions > PoE for the interface you want to configure.
2. Configure PoE settings
For eth1-eth2, select Off, 24 V-4pair, or 54 V-4pair
For eth3-eth7, select Off or 24 V
Then click Save.
Pytanie:
Pytanie:
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
Ubiquiti EP-R8 | Router | EdgeMAX EdgePoint, 6x RJ45 1000Mb/s PoE, 2x RJ45/SFP Combo
