Txm431 - LR is designed to extend the transmission distance based on 10Gbps Ethernet connectivity. It is a high performance 10GBASE-LR 1310nm single mode SFP+ transceiver. It supports full duplex and 10G Ethernet connections up to 10km using 9/125µm fiber cables.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Certification | FCC, CE |
| Depth | 14.6 |
| Duplex system | Full |
| Fiber cable diameters supported (core/cladding) | 9/125 |
| Fiber optic connector | LC (UPC) |
| Fiber type | SM (Single-Mode) |
| Height | 12.9 |
| Hot-Plug support | Yes |
| Input voltage | 3.3 |
| Interface type | SFP+ |
| Maximum data transfer rate | 10000 |
| Maximum transfer distance | 10000 |
| Networking standards | IEEE 802.3ae |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | 0 - 70 |
| Package depth | 81.5 |
| Package height | 38.5 |
| Package weight | 60 |
| Package width | 122.5 |
| Product colour | Metallic |
| Rx power (max) | 0.5 |
| Rx power (min) | -14.4 |
| SFP transceiver type | Fiber optic |
| Single-mode fiber (SMF) supported | Yes |
| Storage relative humidity (H-H) | 5 - 90 |
| Storage temperature (T-T) | -40 - 80 |
| Tx power (max) | 0.5 |
| Tx power (min) | -8.2 |
| Wavelength | 1310 nm, 1310, |
| Width | 55.4 |
| Basic technical parameters | |
| Standards and protocols | IEEE 802.3ae, CSMA/CD, TCP/IP |
| Wavelength | TX: 1550 nm RX: 1310 nm |
| Power supply | 3.3V |
| Certificates | FCC, CE |
| Cable | Single-mode optical fibre |
| Fibre type | 9/125 µm single-mode |
| Maximum cable length | 10 km |
| Connector type | LC/UPC |
| Transmission power | 0.5 dBm(Max) -8.2dBm(Min) |
| Reception power | 0.5dBm(Max) -14.4dBm(Min) |
| Sensitivity | -12.6dBm |
| Environmental conditions | Operating temperature: 0℃~70℃ (32℉~158℉) Storage temperature: -40℃~80℃ (-40℉~176℉) Operating humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
SFP+ is an extension of the SFP standard for 10 Gbit/s transmission rates.
Check whether the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Next, make your choice of fiber optic cable. Single-mode fiber is typically used for longer distances, while multimode is used for shorter distances.
