TP-Link TL-SG1016DE | Switch | 16x RJ45 1000Mb/s, Rack, Unmanaged
KOD: TL-SG1016DE
EAN: 6935364021269
EAN: 6935364021269
Number of LAN ports: 16x [10/100/1000M (RJ45)]
Number of WAN ports: Not applicable
10G support: No
AC input frequency: 50 - 60
AC input voltage: 100 - 240
About product
Easy Smart Switch TL-SG1016DE
The Easy Smart Switch TL-SG1016DE is a device designed for small and medium enterprises where basic functions of local network management are required. Thanks to the Port Mirroring, Loop Prevention and Cable Status Diagnostics functions, the administrator can easily monitor network traffic. To optimize business network traffic, the TL-SG1016DE switch offers a QoS function based on both ports and tags that ensures a smooth and interference-free transfer.
Simple and effective management
The Easy Smart Switch TL-SG1016DE has easy-to-use second layer management functions such as port mirroring, loop prevention and port status diagnostics. With these features, the TL-SG1016DE identifies and locates problems that may occur in the network. Support for QoS based on ports or 802.1p tagging can be used by administrators to ensure smooth voice or video transmission. Whereas support for VLAN based on ports, tagging and TU (easy uplin port configuration) increases network performance and security. The TL-SG1016DE managed switch provides much more functionality than unmanaged switches and is a cost-effective, easy-to-use solution for your network.
Environmentally friendly network
By creating a gigabit Ethernet network, you can now choose an environmentally friendly solution. The TL-SG1016DE is based on technology that allows you to use high bandwidth networks with high energy savings. It automatically adjusts the required power consumption depending on the connection status and cable length, thus reducing power consumption. Traditional network switches consume a significant amount of power for the ports even when connected devices are switched off, while the TL-SG1016DE automatically detects the connection status of each port, reducing the power consumption of inactive ports.
Energy consumption depending on cable length
The use of shorter cables should theoretically reduce energy consumption due to lower energy losses over their length. However, most devices consume the same amount of energy, regardless of the cable length. The TL-SG1016DE analyzes the length of the cables connected to it and adjusts the amount of energy used by the ports accordingly.
Easy to operate
The TL-SG1016DE switch is easy to use and install. Thanks to MDI/MDIX function it is not necessary to use crossed cables. Automatically negotiated connections detect the speed of the connected device on each port (10, 100 or 1000 Mb/s), ensuring the best transmission performance. The small dimensions make the device takes up little space and the included components allow for easy and safe installation in a rack... LEDs display information about the current status of each port for easy diagnostics of connections.Specification
Features / filters
LAN standard
Number of LAN ports
Number of WAN ports
10G support
AC input frequency
AC input voltage
Auto MDI/MDI-X
Basic switching RJ-45 Ethernet ports quantity
Basic switching RJ-45 Ethernet ports type
Broadcast storm control
Built-in modem
Cables included
Certification
Compatible operating systems
Depth
Flow control support
Full duplex
Height
IGMP snooping
Jumbo frames
Jumbo frames support
LED indicators
Link aggregation
MAC address table
Management
Networking standards
Number of queues
Number of VLANs
Numbers of pieces in the package
Operating relative humidity (H-H)
Operating temperature (T-T)
Package depth
Package height
Package weight
Package width
Packet buffer memory
Port mirroring
Power (W)
Power consumption (max)
Power over Ethernet (PoE)
Power supply included
Product colour
Quality of Service (QoS) support
Rack mount kit
Rack mounting
Rate limiting
Storage relative humidity (H-H)
Storage temperature (T-T)
Store-and-forward
Switch layer
Switch type
Switching capacity
Switching layer
Throughput
Type of case
User guide
VLAN support
Width
Specification
Standards and protocols
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p
Ports
16 RJ45 ports 10/100/1000 Mb/s, autonegotiation/AUTO-MDI/MDIX
Network cabling
10Base-T: Cat 3, 4 or 5 UTP cable (up to 100 m)
STP EIA/TIA-568 cable 100 Ω (up to 100 m)
100Base-Tx: Cat 5 or 5e UTP cable (up to 100 m)
STP EIA/TIA-568 cable 100 Ω (up to 100 m)
1000Base-T: UTP cable cat 5, 5e, 6 or higher (up to 100 m)
STP EIA/TIA-568 cable 100 Ω (up to 100 m)
Fanless
Yes
Power supply
100-240 V AC, 50/60 Hz
Power consumption
Max. 12.55 W (220 V/50 Hz)
Dimensions (S x G x W)
294 x 180 x 44 mm (11.6 x 7.1 x 1.7 inches)
Mounting
Rack mounted
Max. energy consumption
19.15 W (220 V/50 Hz)
Amount of heat generated
65.34 BTU/h
Switching efficiency
32 Gb/s
Packet forwarding rate
23.8 Mp/s
MAC address plate
8 K
Packet buffer memory
512 KB
Jumbo frames
10240 bytes
Quality of Service function
Port/queuing priority support 802.1p
Support for 4 priority queues
The transmission speed limiting function for each port
Storm Control function
Features of the layer 2 switch
IGMP Snooping
Aggregation of connections
Port Mirroring
Cable condition diagnostics
Prevention of loops
VLANs
Simultaneous support up to 32 VLAN (with 4096 VLAN IDs)
MTU/Port/Tag VLAN
Method of transmission
Store-And-Forward
Certificates
FCC, CE, RoHS
Package contents
TL-SG1016DE
Power Cable
Operating instructions
CD
Mounting elements
Rubber feet
System requirements
Microsoft® Windows® 98SE, NT, 2000, XP, Vista™, Windows 7 or Windows 8, MAC® OS, NetWare®, UNIX® or Linux
Working environment
Operating temperature: 0℃~40℃ (32℉~104℉)
Storage temperature: -40℃~70℃ (-40℉~158℉)
Operating humidity: 10%~90%, non-condensing
Storage humidity: 5%~90%, non-condensing
FAQ
Pytanie: What's a switch?
Switch, or network switch, connects computer network segments working in the second layer of ISO/OSI models (data link layer). This device is necessary for the efficient operation of any company network, it allows to create a large number of connections. The switches have LAN ports, which effectively work with Ethernet network.
Are you wondering whether it is worth investing in the switch? Definitely yes. The network switch significantly accelerates data transfer, allows for connecting multiple users to the network and has many useful functions for running a company. This type of device is already proven and widely used in business networks of any scale.
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
TP-Link TL-SG1016DE | Switch | 16x RJ45 1000Mb/s, Rack, Unmanaged
