TP-Link TL-SF1006P | Switch | 6x RJ45 100Mb/s, 4x PoE, 67W
KOD: TL-SF1006P
EAN: 6935364030933
EAN: 6935364030933
Number of LAN ports: 6x [10/100M (RJ45)]
Number of PoE ports: 4x [802.3af/at (100M)]
Number of WAN ports: Not applicable
Auto MDI/MDI-X: Yes
Auto-negotiation: Yes
About product
TP-Link SF1006P - PoE switch with five ports
The TL-SF1006P PoE Switch features six 10/100 Mbps RJ45 ports that require no configuration. Four of them (1 to 4) support Power over Ethernet (PoE). The switch automatically detects IEEE 802.3af powered devices (PDs) and supplies them with power. This solution allows you to extend your network coverage in places where there is no access to outlets or power lines, but you need to place access points, IP cameras, IP phones, etc.
Prevention of overloading
Each port of the switch is equipped with the function of automatic negotiation of connection speed. The device also has a prioritization function, which can protect the system in moments of overload. The power consumption of PoE powered devices is up to 67 watts, and devices connected to higher priority ports are powered first.
Protection from overloading
Port Priority: port-1, port-2, port-3, port-4. This function protects your system when the system is overloaded. For example, if port-1, port-2, and port-4 each consume 15.4 watts (where the maximum value for a port is 15.4 watts), then the system will consume 46.2 watts (the PoE LED will light up red). If a device that consumes 21W is connected to port 3, the system will disconnect power from port 4. So port 1 and 2 will consume 15.4W, port 3 will consume 21W, and port 4 will be disconnected from power.
Intuitive operation
The TL-SF1006P is easy to install and use, requiring no configuration or installation.
The TL-SF1006P 6-Port Desktop Switch with four PoE ports is a great solution to expand your home or office network due to its reliability and high-quality performance.
Specification
Features / filters
LAN standard
Number of LAN ports
Number of PoE ports
Number of WAN ports
Auto MDI/MDI-X
Auto-negotiation
Basic switching RJ-45 Ethernet ports quantity
Basic switching RJ-45 Ethernet ports type
Built-in modem
Cable types supported
Certification
DC input voltage
Depth
Fanless
Harmonized System (HS) code
Heat dissipation
Height
Housing material
Input current
MAC address auto-aging supported
MAC address auto-learning supported
MAC address table
Management
Networking standards
Numbers of pieces in the package
Operating relative humidity (H-H)
Operating temperature (T-T)
Power (W)
Power consumption (max)
Power over Ethernet (PoE)
Power over Ethernet plus (PoE+) ports quantity
Power supply included
Product colour
Rack mounting
Stackable
Storage relative humidity (H-H)
Storage temperature (T-T)
Store-and-forward
Switch type
Switching capacity
Switching layer
Type of case
Width
Specification
Ports
6 RJ45 10/100 Mbps ports
Network cabling
10BASE-T: Category 3, 4 or 5 UTP cable (up to 100 m)
EIA/TIA-568 100Ω STP cable (up to 100 m)
100BASE-TX: Category 5 or 5e UTP cable (up to 100 m)
STP EIA/TIA-568 100Ω cable (up to 100 m)
Fanless
Yes
Power supply
External power supply (output: 53.5 V DC / 1.31 A)
PoE ports (RJ45)
Standard: 802.3 af
PoE ports: port 1 - 4
Total PoE power: 67 W
MAC Address Table
2K
Switching capacity
1 Gbps
Dimensions (H x W x D)
158 mm x 101 mm x 25 mm (6.2 x 4.0 x 1.0 in.)
Transmission range
Store-And-Forward
Max. power consumption
Maximum (PoE on): 74 W
Maximum (PoE off): 2 W
Amount of heat generated
6.82BTU/h (no PD connected)
252.34BTU/h (with 58 W PD connected)
Transmission method
Store-And-Forward
Advanced features
Compatible with IEEE 802.3af PoE powered devices (PDs)
Port Prioritization
Automatic memorization and expiration of Mac addresses
Supports IEEE802.3x bandwidth control for full duplex and backpressure for half duplex
Certificates
FCC, CE, RoHS
Contents of the package
TL-SF1006P, power adapter, manual
Power consumption
Maximum (PoE on): 74 W
Maximum (PoE off): 2 W
Work environment
Operating temperature: 0℃~40℃ (32℉~104℉)
Storage temperature: -40℃~70℃ (-40℉~158℉)
Operating air humidity: 10%~90%, non-condensing
Storage humidity: 5%~90%, non-condensing
FAQ
Pytanie: What speed do the RJ45 ports support?
The RJ45 ports on the TPlink TL-SF1006P have a speed of [10/100M].
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
TP-Link TL-SF1006P | Switch | 6x RJ45 100Mb/s, 4x PoE, 67W
